EVAL-L99PM62-72 STMicroelectronics

EVAL-L99PM62-72 L99PM62GXP & L99PM72GXP Evaluation Board Data brief ST SPI interface for mode control and diagnosis 5 fully protected high-side drivers with internal 4-channel PWM generator 2 low-side drivers with active Zener clamping 4 internal PWM timers 2 operational amplifiers with rail-to-rail outputs (VS) and low voltage inputs Temperature warning and thermal shutdown Graphic User Interface (GUI) Description Features EVAL-L99PM62-72 is designed to evaluate the performance of two Power Management . The Type Transceiver Outputs evaluation board comes pre-assembled with L99PM62GXP and L99PM72GXP ICs providing L99PM62GXP LIN:20 Kbit/s 5V 250mA electronic control modules with enhanced power HS CAN: 1 Mbit/s 5V 100mA L99PM72GXP management functionality including various standby modes, as well as LIN and HS CAN physical communication layers. This Evaluation Two 5V voltage regulators for microcontroller board consists of a motherboard (STM8 Universal and peripheral supply Board) and two daughterboards. The Ultra low quiescent current in standby modes motherboard, based on STM8 microcontroller, provides the logic section for monitoring and Programmable reset generator for power-on driving the devices assembled in two different and undervoltage daughterboards. With the aim to make the board Configurable window watchdog and fail safe usage and settings simpler, ST provides a output dedicated user-friendly software with a Graphic LIN 2.1 compliant (SAEJ2602 compatible) User Interface (GUI). This enables the user to set transceiver L99PM62GXP and L99PM72GXP parameters and registers, simultaneously showing real time Advanced HS CAN transceiver (ISO 11898-2/- device diagnostic information like output current 5 and SAE J2284 compliant) with local failure evolution, battery voltage monitoring, board and bus failure diagnosis, L99PM72GXP temperature and much more. supports selective wake-up functionality as for ISO 11898-6. Table 1. Device summary 3-channel contact monitoring interface with Order code Reference programmable cyclic sense functionality Programmable periodic system wake-up L99PM62GXP & L99PM72GXP EVAL-L99PM62-72 feature Evaluation board February 2020 DB3554 Rev 2 1/14 For further information contact your local STMicroelectronics sales office. www.st.comContents EVAL-L99PM62-72 Contents 1 Application schematics and layouts 5 1.1 L99PM62GXP/L99PM72GXP daughterboard 5 1.2 STM8 motherboard 8 2 Revision history . 13 2/14 DB3554 Rev 2