EVALSPEAR600 STMicroelectronics

EVALSPEAr600 Evaluation board for SPEAr600 embedded MPU Data brief Additional 112 GPIOs when the external FPGA Features is used SPEAr600 embedded MPU Up to 2 Gbits DDR2 333 MHz (std 128 MB) Description Up to 16 MB Serial Flash (std 8 MB) The EVALSPEAr600 evaluation board allows you Up to 2 Gb NAND Flash (std 64 MB) to quickly evaluate and debug software for the 2 SPEAr600. It acts as a learning tool to rapidly get 4 Kb Serial I C familiar with the SPEAr600 features and provides Two USB 2.0 full Host port channels a starting point for the development of the final One USB 2.0 HS Device application board. It is equipped with most of the interfaces offered by the SPEAr600. 10/100/1000 Ethernet port Two serial ports (up to 115 Kbaud) It is equipped with all the interfaces offered by the SPEAr600. A special version of the board Debug ports (JTAG + ETM9) populated with an FPGA also exists for 8 ADC channels (10 bit, 1 Msamples) developing customer-specific IPs. 10 GPIOs LCD I/F up to 24 bits-per-pixel (bpp) Figure 1. EVALSPEAr600 evaluation board September 2010 Doc ID 18020 Rev 1 1/3 For further information contact your local STMicroelectronics sales office. www.st.com 3Revision history EVALSPEAr600 Revision history Table 1. Document revision history Date Revision Changes 20-Sep-2010 1 Initial release. 2/3 Doc ID 18020 Rev 1