M24128-BFMC6TG STMicroelectronics

M24128-BW M24128-BR M24128-BF M24128-DF Datasheet 128-Kbit serial IC bus EEPROM Features 2 Compatible with following I C bus modes: 1 MHz SO8N 400 kHz TSSOP8 150 mil width 100 kHz 169 mil width Memory array: 128 Kbit (16 Kbyte) of EEPROM Page size: 64 byte Additional write lockable page (M24128-D order codes) Single supply voltage range: UFDFPN5 (MH) 1.7 V to 5.5 V over 40 C / +85 C UFDFPN8 (MC) DFN5 - 1.7x1.4 mm 1.6 V to 5.5 V over 0 C / +85 C DFN8 - 2x3 mm Write: Byte write within 5 ms Page write within 5 ms WLSCP (CS) Operating temperature range: from -40 C up to +85 C Random and sequential read modes Write protect of the whole memory array Unsawn wafer Enhanced ESD/latch-Up protection More than 4 million write cycles Product status link More than 200-years data retention M24128-BF Packages M24128-DF RoHS-compliant and Halogen-free (ECOPACK2) M24128-BR SO8 ECOPACK2 M24128-BW TSSOP8 ECOPACK2 UFDFPN8 ECOPACK2 WLCSP ECOPACK2 UFDFPN5 ECOPACK2 Unsawn wafer (each die is tested) DS6639 - Rev 31 - October 2020 www.st.com For further information contact your local STMicroelectronics sales office.M24128-BW M24128-BR M24128-BF M24128-DF Description 1 Description 2 The M24128 is a 128-Kbit I C-compatible EEPROM (electrically erasable programmable memory) organized as 16 K 8 bits. The M24128-BW can operate with a supply voltage from 2.5 V to 5.5 V, the M24128-BR can operate with a supply voltage from 1.8 V to 5.5 V, and the M24128-BF and M24128-DF can operate with a supply voltage from 1.7 V to 5.5 V (the M24128-BF and the M24128-DF can also operate down to 1.6 V, under some restricting conditions). All these devices operate with a clock frequency of 1 MHz (or less), over an ambient temperature range of 40 C / +85 C. The M24128-D offers an additional page, named the identification page (64 byte). The identification page can be used to store sensitive application parameters which can be (later) permanently locked in read-only mode. Figure 1. Logic diagram VCC 3 E0-E2 SDA M24xxx SCL WC VSS Table 1. Signal names Signal name Function Direction E2, E1, E0 Chip enable Input SDA Serial data I/O SCL Serial clock Input WC Write control Input V Supply voltage - CC V Ground - SS Figure 2. 8-pin package connections, top view E0 1 8 VCC E1 2 7 WC E2 3 6 SCL VSS 4 5 SDA 1. See Section 9 Package information for package dimensions, and how to identify pin 1 DS6639 - Rev 31 page 2/46