P-NUCLEO-AZURE1 STM32 Nucleo pack for IoT node with Wi-Fi, sensors and NFC connected to Microsoft Azure IoT Data brief Description The P-NUCLEO-AZURE1 STM32 Nucleo pack is a hardware kit composed of the following boards: NUCLEO-L476RG, X-NUCLEO-IDW01M1, XNUCLEO-IKS01A2 and X-NUCLEO-NFC01A1. The P-NUCLEO-AZURE1 is supported by the FP-CLD-AZURE1 function pack expansion for the STM32 Open Development Environment. The software package contains ready-to-use binaries to quickly connect the STM32 Nucleo board to a cloud web dashboard for sensor data visualization. The P-NUCLEO-AZURE1 used with FPCLDAZURE1 allows transmitting sensor data to the cloud and receiving commands from cloud applications. Wi-Fi parameter configuration is also greatly Features simplified thanks to the supported NFC NUCLEO-L476RG: STM32 Nucleo-64 connectivity, which connects your device to the development board with STM32L476RG cloud and lets you jump-start end-to-end IoT MCU, supporting Arduino UNO R3 and ST development, to help you focus on adding morpho connectivity custom functions. X-NUCLEO-IDW01M1: Wi-Fi expansion board based on the SWPF01SA module X-NUCLEO-IKS01A2: motion MEMS and environmental sensor expansion board X-NUCLEO-NFC01A1: dynamic NFC tag expansion board based on M24SR Out-of-the-box software support to connect the device to the Microsoft Azure IoT cloud using the FP-CLD-AZURE1 firmware package RoHS compliant May 2017 DocID030615 Rev 1 1/4 www.st.com For further information contact your local STMicroelectronics sales office Kit description P-NUCLEO-AZURE1 Kit description The NUCLEO-L476RG board provides an affordable and flexible way to try out new concepts and to build prototypes with the STM32 MCU. It does not require any separate probes as it integrates the ST-LINK/V2-1 debugger and programmer. The X-NUCLEO-IDW01M1 is a Wi-Fi expansion board for STM32 Nucleo based on the SPWF01SA module. The on-board CE, IC and FCC certified SPWF01SA module has an embedded STM32 MCU, a low-power Wi-Fi b/g/n SoC with integrated power amplifier and power management and an SMD antenna. The SPWF01SA module is also equipped with 1 MByte of external FLASH for firmware update over-the-air (FOTA). The X-NUCLEO-IKS01A2 is a motion MEMS and environmental sensor expansion board for the STM32 Nucleo. It is designed around the LSM6DSL 3D accelerometer and 3D gyroscope, the LSM303AGR 3D accelerometer and 3D magnetometer, the HTS221 humidity and temperature sensor and the LPS22HB pressure sensor. The X-NUCLEO-NFC01A1 is a dynamic NFC tag expansion board for the STM32 Nucleo. It is designed around the M24SR64-Y. The M24SR64-Y device is a dynamic NFC/RFID tag IC with a dual interface. It embeds a 64 Kbit EEPROM memory. It can be operated from an IC interface or by a 13.56 MHz RFID reader or an NFC phone. The X-NUCLEO-IDW01M1 interfaces with the MCU on the STM32 Nucleo board via the UART serial port on the morpho connector. The X-NUCLEO-IKS01A2 and XNUCLEONFC01A1 support Arduino UNO R3 connectivity. The FP-CLD-AZURE1 function pack, downloadable at www.st.com, directly connects your IoT node to the Microsoft Azure IoT. The software implements application level functions based on the HTTP protocol and enables communication with Microsoft Azure IoT. You can use it to prototype end-to-end IoT applications together with Microsoft Azure, transmit real-time sensor data and receive commands. The software runs on the STM32 microcontroller and includes drivers for the Wi-Fi module, sensors and dynamic NFC/RFID tag. The package bundles examples for transmitting sensor data and controlling the device via Microsoft Azure IoT. 2/4 DocID030615 Rev 1