P-NUCLEO-USB002 STMicroelectronics

P-NUCLEO-USB002 Data brief USB Type-C and Power Delivery Nucleo pack with NUCLEO-F072RB expansion board based on the STUSB1602 Features 32-bit ARM Cortex -M0-based microcontroller STM32F072RB with 128 kB Flash and 16 kB SRAM Dual port solution based on certified USB Type-C port controller STUSB1602, featuring: Type-C FSM with attach/detach and cable orientation detection USB PD PHY and BMC transceiver High voltage (20 V) technology V voltage monitoring BUS 600 mA V power switch CONN V and V discharge paths BUS CONN Dead-battery support 22 V CC line protection V switch gate drivers BUS Power connector to interface with external power supply (not included) USB 2.0 full speed data communication interface RoHS compliant Applications USB type-C cable and connector spec. (rev 1.3) USB Power Delivery spec. (rev 2.0 and 3.0) Product status link P-NUCLEO-USB002 Description The STM32 Nucleo pack is designed for USB Type-C and Power Delivery specifications. Used with the embedded X-CUBE-USBPD certified software, the P-NUCLEO- USB002 represents a development tool enabling fast prototyping of USBPD applications leveraging ready-to-use ST componentry and software. The P-NUCLEO-USB002 kit is designed to exploit the performance of the STM32F072 32-bit microcontroller based on ARM Cortex -M0 and two STUSB1602 USB Type-C port controllers, to develop applications managing up to two USB Type-C ports. The STUSB1602 is a Type-C controller designed with 20-V technology that integrates a fully-featured USB Type-C state machine and a USBPD PHY + BMC driver. This analog front end features: Type-C attach and cable orientation detection source / sink / DRP power role configuration integrated V power CONN switch integrated V and V discharge path high voltage protection (including BUS CONN CC pins) V switch gate drivers. BUS The P-NUCLEO-USB002 is fully configurable and ready to support different power roles such as: provider, consumer or DRP. The X-CUBE-USBPD is compliant with the USB Type-C 1.3 and USB Power Delivery 2.0 and 3.0 specifications. DB3148 - Rev 3 - May 2018 www.st.com For further information contact your local STMicroelectronics sales office.P-NUCLEO-USB002 P-NUCLEO-USB002 system architecture 1 P-NUCLEO-USB002 system architecture The USB Type-C and Power Delivery kit is composed of: 1. The NUCLEO-F072RB development board that acts as the control board where the X-CUBE-USB-PD software is running 2. Power Delivery expansion board with two embedded STUSB1602 Type-C controllers 3. A USB Type-C fully-featured and certified cable Figure 2. P-NUCLEO-USB002 kit The Power Delivery expansion board is equipped with: Two DRP USB Type-C ports managed by two STUSB1602 Type-C port controllers Optional V current sensing (and discrete voltage monitoring) BUS Dedicated power connector to interface with an external power supply (not included in the kit) to provide different profiles as well as V (5 V) if necessary CONN On-board power management that is able to supply internal voltages Six status LEDs for the USBPD ports and a user LED USB 2.0 interface available on both Type-C port RoHS compliant PCB type and size: material: FR4 four-layer copper thickness: 35 m total expansion board dimensions: 74 mm x 98 mm Note: The USB 2.0 peripheral can be alternatively mapped on one port or in pass-through configuration. The NUCLEO-F072RB development board includes: The STM32F072RBT6 32-bit microcontroller based on the ARM Cortex-M0 with 128 kB Flash memory, 16 kB of SRAM, USB 2.0 full speed data interface in LQFP64 package Two types of extension resources: Arduino Uno revision 3 connectivity ST morpho extension pin headers for full access to all STM32 I/Os On-board ST-LINK/V2-1 debugger/programmer with SWD connector: DB3148 - Rev 3 page 2/5