STEVAL-IPE003V1 STMicroelectronics

STEVAL-IPE003V1 Electricity Meter (mono phase) - Measurement Board 1 Current Transformer + Shunt Data Brief Features Single-phase, 0.5 class accuracy guaranteed U (RMS) = 140 to 300V, NOM I /I (RMS) = 2/20A, f = 45 to 65Hz, NOM MAX LIN T = -40 to +85 C AMB Tamper detection for power line systems LED checking for: Functioning No Load Condition STEVAL-IPE003V1 Tamper Detection Reverse Energy Direction Stepper Motor Display Connector Applications Capacitive Power Supply This metering module can be used to build a SPI Interface Connector: Class 0.5 Single-phase standalone or Active, Reactive Apparent Power microprocessor based meter with or without consumption Tamper detection for power line systems of V , I and Line Frequency U = 140 to 300V , I /I = 2/20A , RMS RMS NOM RMS NOM MAX RMS Status f = 45 to 65Hz and T = -40 to +85 C. LIN AMB In standalone mode, a stepper motor display should be connected to pins W5 and W6. A user can select the type of stepper or the constant of output pulse frequency by changing LVS or KMOT configurators respectively. In Microprocessor based mode, a control board with a microprocessor should be connected to the male connector P1 of the module using a 10-wire flat cable. Rev 1 January 2006 1/4 For further information contact your local STMicroelectronics sales office www.st.com 4 Obsolete Product(s) - Obsolete Product(s)1 Board Schematic STEVAL-IPE003V1 1 Board Schematic Figure 1. Scheme 2/4 Obsolete Product(s) - Obsolete Product(s)