STEVAL-ISC003V1 STMicroelectronics

STEVAL-ISC003V1 STUSB4710 evaluation board USB PD controller with on-board DC-DC Data brief Description The STEVAL-ISC003V1 evaluation board is a ready-to-use USB PD source using the STUSB4710 and ST1S14 ICs. It is used to demonstrate the features of the STUSB4710 controller by converting a single-voltage power supply into a Type-C power delivery source. The STUSB4710 controls the Type-C port ensuring power delivery advertising and negotiation, controls the DC-to-DC converter and power paths, and monitors V voltage. BUS The ST1S14 device ensures the step down Features conversion from the input DC port to the negotiated VBUS voltage. 1 x USB PD port (source) STUSB4710 USB power delivery controller The various LEDs indicate the operating status of Compliant with: the STUSB4710 and USB PD port. USB Type-C r1.2 The USB PD port is pre-configured with five USB PD r2.0 different PDO voltages, covering all main On-board 20 V/3 A DC-DC applications (5 V, 9 V, 12 V, 15 V and 20 V). V power switches and discharge path BUS VCONN support (programmable up to 600 mA) Support up to 5 power data objects (PDO) Pre-configured PDOs High voltage protection on connector pins Customizable startup profiles Compatible with NUCLEO-F072RB board for configuration and debug interface RoHS compliant September 2017 DocID030515 Rev 3 1/4 www.st.com For further information contact your local STMicroelectronics sales office Schematic diagrams STEVAL-ISC003V1 1 Schematic diagrams Figure 1: STEVAL-ISC003V1 circuit schematic 2/4 DocID030515 Rev 3