STEVAL-MKI009V1 STMicroelectronics

UM0979 User manual STEVAL-MKI109V2: eMotion motherboard for MEMS adapter boards Introduction The STEVAL-MKI109V2 (eMotion) is a motherboard designed to provide the user with a complete ready-to-use platform for the demonstration of MEMS devices mounted on adapter boards. The STEVAL-MKI109V2 uses an STM32F103RET6 microcontroller which functions as a bridge between the sensor on the adapter board and the PC on which it is possible to use the Unico graphical user interface (GUI) downloadable from the ST website or dedicated software routines for customized applications. This user manual describes the hardware included with the demonstration kit and provides the information required to install the demonstration board and how to upgrade the firmware of the microcontroller. For details regarding the features of each sensor, please refer to the datasheet available for each individual device. October 2016 DocID017768 Rev 5 1/41 www.st.com Contents UM0979 Contents 1 Demonstration kit description ........................................................ 5 2 eMotion board installation ............................................................ 10 2.1 Hardware installation (Windows platforms) ..................................... 10 2.2 DFU ................................................................................................. 11 2.2.1 DFU on Windows .............................................................................. 12 2.2.2 DFU on Linux .................................................................................... 12 2.2.3 DFU on Mac OS ............................................................................... 13 3 Supported MEMS adapter boards ................................................ 14 4 Supported commands ................................................................... 16 4.1 Getting started ................................................................................. 16 4.2 Supported commands ..................................................................... 16 4.2.1 Commands list and description ........................................................ 17 4.2.2 Digital output accelerometers: supported commands ...................... 28 4.2.3 Analog output accelerometers: supported commands ..................... 29 4.2.4 Digital output gyroscopes: supported commands ............................ 30 4.2.5 Analog output gyroscopes: supported commands ........................... 31 4.2.6 Digital output magnetometers: supported commands ...................... 32 4.2.7 Digital output pressure sensor: supported commands ..................... 33 4.2.8 Digital output humidity sensor: supported commands ..................... 34 4.3 Quick start ....................................................................................... 34 5 Schematic diagrams ...................................................................... 35 6 Bill of materials .............................................................................. 37 7 Revision history ............................................................................ 40 2/41 DocID017768 Rev 5