STGAP2D Galvanically isolated 4 A half-bridge gate driver Datasheet - production data Description The STGAP2D is a half-bridge gate driver which isolates the gate driving channels from the low voltage control and interface circuitry. The gate driver is characterized by 4 A capability and rail-to-rail outputs, making the device also SO-16 suitable for high power inverter applications such as motor drivers in industrial applications. Features The device integrates protection functions: dedicated SD and BRAKE pins are available, 1700 V dual channel gate driver UVLO and thermal shutdown are included to Driver current capability: 4 A sink / source at easily design high reliability systems, and the 25 C interlocking function prevents outputs from being high at the same time. dV/dt transient immunity 100 V/ns The input to output propagation delay results are Overall input-output propagation delay: 80 ns contained within 80 ns, providing high PWM UVLO function control accuracy. Interlocking function A standby mode is available in order to reduce Dedicated SD and BRAKE pins idle power consumption. Gate driving voltage up to 26 V 3.3 V, 5 V TTL/CMOS inputs with hysteresis Temperature shutdown protection Standby function Applications Motor driver for industrial drives, factory automation, home appliances and fans. 600/1200 V inverters Battery chargers Induction heating Welding UPS Power supply units DC-DC converters Power Factor Correction DS12746 Rev 1 1/21 This is preliminary information on a new product foreseen to be developed. Details are subject to change without notice. www.st.comContents STGAP2D Contents 1 Block diagram 4 2 Pin description and connection diagram 5 3 Electrical data 6 3.1 Absolute maximum ratings . 6 3.2 Thermal data . 6 3.3 Recommended operating conditions . 6 4 Electrical characteristics . 8 4.1 Electrical characteristics . 8 5 Functional description 10 5.1 Gate driving power supply and UVLO . 10 5.2 Power-up, power-down and safe state 10 5.3 Control inputs 11 5.4 Watchdog . 11 5.5 Thermal shutdown protection 11 5.6 Standby function 11 6 Typical application diagram 13 7 Layout 14 7.1 Layout guidelines and considerations . 14 7.2 Layout example 15 8 Testing and characterization information . 16 9 Package information 17 10 Suggested land pattern . 19 11 Ordering information . 20 2/21 DS12746 Rev 1