STM32756G-EVAL Evaluation board with STM32F756NG MCU Data brief Features STM32F756NGH6 microcontroller with 1 Mbyte Flash and 320+4 Kbytes RAM Six 5 V power supply options: Power jack ST-LINK/V2-1 USB connector User USB HS connector User USB FS1 connector User USB FS2 connector Daughterboard SAI Audio DAC, stereo audio jack which supports headset with microphone Stereo digital microphone, audio jack connector used to connect external speakers 2 Gbytes (or more) SDMMC interface microSD card RF-EEPROM on I2C compatible serial 1. Picture not contractual interface RS-232 communication Potentiometer IrDA transceiver Motor control connector JTAG/SWD and ETM trace debug support, ST-LINK/V2-1 embedded IEEE-802.3-2002 compliant Ethernet connector Camera module 8Mx32bit SDRAM, 1Mx16bit SRAM & 8Mx16bit Nor Flash 512 Mbits QuadSPI Nor Flash 5.7 inch 640x480 pixel TFT color LCD with capacitive touch panel Joystick with 4-direction control and selector. Reset, WakeUp/Tamper or key button 4 color user LEDs Extension connectors and memory connectors for daughterboard or wrapping board USB OTG HS and FS with Micro-AB connectors RTC with backup battery CAN 2.0A/B compliant connection April 2015 DocID027689 Rev 1 1/4 For further information contact your local STMicroelectronics sales office. www.st.comDescription STM32756G-EVAL 1 Description The STM32756G-EVAL evaluation board is a complete demonstration and development platform for STMicroelectronics ARM Cortex -M7 core-based STM32F756NGH6 2 microcontrollers. It features four I C interfaces, six SPIs with three mutiplexed simplex 2 I S interfaces, SDMMC, four USARTs, two CANs, three 12-bit ADCs, two 12-bit DACs, two SAIs, 8- to 14-bit digital camera module interface, internal 320+4 Kbytes SRAM and 1 Mbytes Flash, USB HS OTG and USB FS OTG, Ethernet MAC, FMC interface, Quad- SPI interface, Cryptographic acceleration, JTAG debugging support. This evaluation board can be used as a reference design for user application development but it is not considered as a final application. The full range of hardware features on the board helps the user to evaluate all peripherals (USB OTG HS, USB OTG FS, Ethernet, Motor Control, CAN, microSD Card, USART, Audio DAC and ADC, digital microphone, IrDA, RF-EEPROM, SRAM, Nor Flash, SDRAM, Quad- SPI Flash, 5.7 TFT LCD with capacitive touch panel and others) and develop his own applications. Extension headers make it possible to easily connect a daughterboard for a specific application. The integrated ST-LINK/V2-1 provides an embedded in-circuit debugger and programmer for the STM32 MCU. 2 Order code To order the evaluation board based on the STM32F756NG MCU, use the order code: STM32756G-EVAL2. 2/4 DocID027689 Rev 1