STM32H725xE/G Arm Cortex -M7 32-bit 550 MHz MCU, up to 1 MB Flash, 564 KB RAM, Ethernet, USB, 3x FD-CAN, Graphics, 2x 16-bit ADCs Datasheet - production data Features Includes ST state-of-the-art patented technology LQFP100 (14 x 14 mm) VFQFPN 68 LQFP144 (20 x 20 mm) Core (8x8 mm) LQFP176 (24 x 24 mm) 32-bit Arm Cortex -M7 CPU with DP-FPU, L1 FBGA FBGA cache: 32-Kbyte data cache and 32-Kbyte instruction cache allowing 0-wait state execution from embedded Flash memory and external memories, frequency up to 550 MHz, UFBGA 169 (7 x 7 mm) TFBGA100 UFBGA 176+25 (10 x 10 mm) MPU, 1177 DMIPS/2.14 DMIPS/MHz (8x8 mm) (Dhrystone 2.1), and DSP instructions Memories Up to 1 Mbyte of embedded Flash memory with ECC SRAM: total 564 Kbytes all with ECC, including 128 Kbytes of data TCM RAM for critical real- Clock, reset and supply management time data + 432 Kbytes of system RAM (up to 256 Kbytes can remap on instruction TCM 1.62 V to 3.6 V application supply and I/O RAM for critical real time instructions) + POR, PDR, PVD and BOR 4 Kbytes of backup SRAM (available in the lowest-power modes) Dedicated USB power Flexible external memory controller with up to Embedded DCDC and LDO regulator 24-bit data bus: SRAM, PSRAM, (*)VFQFPN68 variant is DCDC only SDRAM/LPSDR SDRAM, NOR/NAND Internal oscillators: 64 MHz HSI, 48 MHz memories HSI48, 4 MHz CSI, 32 kHz LSI 2 x Octo-SPI interface with XiP External oscillators: 4-50 MHz HSE, 2 x SD/SDIO/MMC interface 32.768 kHz LSE Bootloader Low power Graphics Sleep, Stop and Standby modes Chrom-ART Accelerator graphical hardware V supply for RTC, 3232-bit backup BAT accelerator enabling enhanced graphical user registers interface to reduce CPU load Analog LCD-TFT controller supporting up to XGA resolution 216-bit ADC, up to 3.6 MSPS in 16-bit: up to 22 channels and 7.2 MSPS in double- interleaved mode December 2021 DS13311 Rev 3 1/282 www.st.com WLCSP 115 0.35 mm pitchSTM32H725xE/G 1 x 12-bit ADC, up to 5 MSPS in 12-bit, up to 12 external clock and up to 5 x SPI (from 5 x channels USART when configured in synchronous mode) 2 x comparators 2x SAI (serial audio interface) 2 x operational amplifier GBW = 8 MHz 1 FD/TT-CAN and 2x FD-CAN 2 12-bit D/A converters 8- to 14-bit camera interface Digital filters for sigma delta modulator 16-bit parallel slave synchronous interface (DFSDM) SPDIF-IN interface 8 channels/4 filters HDMI-CEC Ethernet MAC interface with DMA controller 4 DMA controllers to offload the CPU USB 2.0 high-speed/full-speed 1 MDMA with linked list support device/host/OTG controller with dedicated 2 dual-port DMAs with FIFO DMA, on-chip FS PHY and ULPI for external 1 basic DMA with request router capabilities HS PHY SWPMI single-wire protocol master I/F 24 timers MDIO slave interface Seventeen 16-bit (including 5 x low power 16-bit timer available in stop mode) and four Mathematical acceleration 32-bit timers, each with up to 4 IC/OC/PWM or CORDIC for trigonometric functions pulse counter and quadrature (incremental) acceleration encoder input FMAC: Filter mathematical accelerator 2x watchdogs, 1x SysTick timer Digital temperature sensor Debug mode SWD and JTAG interfaces True random number generator 2-Kbyte embedded trace buffer CRC calculation unit Up to 128 I/O ports with interrupt RTC with sub-second accuracy and capability hardware calendar Up to 35 communication interfaces ROP, PC-ROP, tamper detection Up to 5 I2C FM+ interfaces (SMBus/PMBus) 96-bit unique ID Up to 5 USARTs/5 UARTs (ISO7816 interface, LIN, IrDA, modem control) and 1 x LPUART All packages are ECOPACK2 compliant Up to 6 SPIs with 4 with muxed duplex I2S for audio class accuracy via internal audio PLL or Table 1. Device summary Reference Part number STM32H725ZE, STM32H725VE, STM32H725RE, STM32H725IE, STM32H725xE STM32H725AE STM32H725ZG, STM32H725VG, STM32H725RG, STM32H725IG, STM32H725xG STM32H725AG 2/282 DS13311 Rev 3