STTH30AC06 Turbo 2 ultrafast high voltage rectifier Datasheet - production data A K Description This device, which uses ST Turbo 2 600 V technology, is ideal for switching power supplies and industrial applications as a rectification and discontinuous mode PFC boost diode. Table 1: Device summary Symbol Value A IF(AV) 30 A K TO220FPAC V 600 V RRM Tj 175 C A V (typ.) 1.15 V F K trr (max.) 45 ns A A K A TO3P-3L Features Ultrafast switching Low reverse current Low thermal resistance Reduced switching and conduction losses Insulated package: TO-220FPAC Insulated voltage: 2000 V sine RMS February 2018 DocID027889 Rev 2 1/10 www.st.com This is information on a product in full production. Characteristics STTH30AC06FP 1 Characteristics Table 2: Absolute ratings (limiting values per diode at 25 C, unless otherwise specified) Symbol Parameter Value Unit VRRM Repetitive peak reverse voltage 600 V I Forward rms current 50 A F(RMS) IF(AV) Average forward current 30 A I Surge non repetitive forward current t = 10 ms sinusoidal 270 A FSM p Tstg Storage temperature range -65 to +175 C T Operating junction temperature 175 C j Table 3: Thermal parameters Symbol Parameter Max. value Unit TO-220FPAC 3.5 R Junction to case C/W th(j-c) TO3P-3L 0.7 Table 4: Static electrical characteristics Symbol Parameter Test conditions Min. Typ. Max. Unit Tj = 25 C - 20 (1) I Reverse leakage current V = V A R R RRM T = 150 C - 80 800 j Tj = 25 C - 1.95 (2) V Forward voltage drop I = 30 A V F F T = 150 C - 1.15 1.45 j Notes: (1) Pulse test: t = 5 ms, < 2% p (2) Pulse test: tp = 380 s, < 2 % To evaluate the conduction losses, use the following equation: 2 P = 1.1 x IF(AV) + 0.012 x IF (RMS) Table 5: Dynamic electrical characteristics Symbol Parameters Test conditions Min. Typ. Max. Unit I = 0.5 A, F I = 0.25 A, - 35 rr I = 1 A R t Reverse recovery time T = 25 C ns rr j IF = 1 A, dIF/dt = 50 A/s, - 45 60 VR = 30 V I = 30 A, F Reverse recovery I T = 125 C dI /dt = 100 A/s, - 6 8 A RM j F current V = 400 V R 2/10 DocID027889 Rev 2