VN340SP-E STMicroelectronics

VN340SP-E Quad high-side smart power solid state-relay Datasheet - production data Built-in current limiter Undervoltage shutdown Open drain diagnostic output Fast demagnetization of inductive loads Conformity to IEC 61131-2 3RZHU62 Description Features The VN340SP-E is a monolithic device developed using ST VIPower technology, intended to drive four independent resistive or inductive loads with (1) (1) (1) (1) Type V R I V demag DS(on) OUT CC one side connected to ground. Active current limitation avoids dropping the system power VN340SP-E V -55 V 0.2 0.7 A 36 V CC supply in case of shorted load. Built-in thermal 1. Per channel shutdown protects the chip from overtemperature and short-circuit. The open drain diagnostic output indicates overtemperature conditions. Output current: 0.7 A per channel Each I/O is pulled down when the Digital I/O clamped at 32 V minimum voltage overtemperature condition of the relative channel Shorted load and overtemperature protections is verified. Protection against loss of ground Figure 1. Block diagram /0 *,3* December 2014 DocID11468 Rev 6 1/17 This is information on a product in full production. www.st.comContents VN340SP-E Contents 1 Absolute maximum ratings . 3 2 Pin connections . 4 3 Electrical characteristics . 5 4 Test circuits 7 5 Switching time waveforms and truth table . 9 6 Package information 11 6.1 PowerSO-10 package information .11 6.2 PowerSO-10 packing information . 13 7 Ordering information . 15 8 Revision history . 16 2/17 DocID11468 Rev 6