VN751PT STMicroelectronics

VN751PT High-side driver Datasheet - production data Description The VN751PT is a monolithic device developed using STMicroelectronics VIPower M03 technology, intended to drive any kind of load with one side connected to ground. Active VCC pin voltage clamp protects the device against low energy spikes. Active current limitation combined with thermal shutdown and automatic restart protect the device against overload. The device Features automatically turns off in case of ground pin disconnection. This device is especially suitable 8 V to 36 V supply voltage range for industrial applications in conformity with IEC Up to I = 2.5 A operating current OUT 61131-2 programmable controller international standard. R : 60 m DS(on) CMOS compatible input Table 1. Device summary Thermal shutdown Order code Package Packing Shorted load protection VN751PT Tube Undervoltage and overvoltage shutdown PPAK VN751PTTR Tape and reel Protection against loss of ground Fast demagnetization of inductive loads Very low standby current Compliance to 61000-4-4 IEC test up to 4 kV Open drain status output May 2018 DocID12137 Rev 10 1/23 This is information on a product in full production. www.st.comContents VN751PT Contents 1 Block diagram 5 2 Pin connection 6 3 Maximum ratings 7 4 Electrical characteristics . 8 5 Test circuits . 10 6 Switching time waveforms and truth table 11 7 Application schematic 13 8 Reverse polarity protection 14 9 Active VDS clamp 15 10 Package information 18 10.1 PPAK package information 18 10.2 PPAK packing information 20 11 Revision history . 22 2/23 DocID12137 Rev 10