VN751STR STMicroelectronics

VN751S High-side driver Datasheet - production data Description The VN751S is a monolithic device developed using STMicroelectronics VIPower technology, intended to drive any kind of load with one side connected to ground. Active V pin voltage CC clamp protects the device against low energy spikes. Active current limitation combined with 40 thermal shutdown and automatic restart protect the device against overload. The device automatically turns off in case of ground pin disconnection. This device is especially suitable Features for industrial applications in conformity with IEC R : 60 m 61131-2 programmable controller international DS(on) standard. I : 2.5 A OUT V : 36 V CC Table 1. Device summary CMOS compatible input Order code Package Packing Thermal shutdown VN751S Tube Shorted load protection SO-8 VN751STR Tape and reel Undervoltage and overvoltage shutdown Protection against loss of ground Very low standby current Compliance to 61000-4-4 IEC test up to 4 kV Open drain status output Fast demagnetization of inductive loads May 2018 DocID12320 Rev 9 1/22 This is information on a product in full production. www.st.comContents VN751S Contents 1 Block diagram 5 2 Pin connection 6 3 Maximum ratings 7 4 Electrical characteristics . 8 5 Test circuits . 10 6 Switching time waveforms and truth table 11 7 Application schematic 13 8 Reverse polarity protection 14 9 Active VDS clamp 15 10 Package information 18 10.1 SO-8 package information 18 10.2 SO-8 packing information . 20 11 Revision history . 21 2/22 DocID12320 Rev 9