VND600SPTR-E STMicroelectronics

VND600SP-E Double channel high-side driver Features Type R I V DS(on) lim CC VND600SP-E 30 m 25 A 36 V 10 1 ECOPACK : lead free and RoHS compliant PowerSO-10 Automotive Grade: compliance with AEC Guidelines Very low standby current Description CMOS compatible input The VND600SP-E is a monolithic device made Proportional load current sense using STMicroelectronics VIPower M0-3 Current sense disable technology. It is intended for driving resistive or inductive loads with one side connected to Thermal shutdown protection and diagnosis ground. Active V pin voltage clamp protects the CC Undervoltage shutdown device against low energy spikes (see ISO7637 Overvoltage clamp transient compatibility table). Load current limitation This device has two channels in high-side configuration each channel has an analog sense output on which the sensing current is proportional (according to a known ratio) to the corresponding load current. Built-in thermal shutdown and outputs current limitation protect the chip from overtemperature and short circuit. Device turns-off in case of ground pin disconnections. Table 1. Device summary Order codes Package Tube Tape and reel PowerSO-10 VND600SP-E VND600SPTR-E September 2013 Doc ID 10876 Rev 4 1/27 www.st.com 1Contents VND600SP-E Contents 1 Block diagram and pin description . 5 2 Electrical specifications 6 2.1 Absolute maximum ratings . 6 2.2 Thermal data . 7 2.3 Electrical characteristics . 8 2.4 Electrical characteristics curves 15 3 Application information . 17 3.1 GND protection network against reverse battery . 17 3.1.1 Solution 1: resistor in the ground line (RGND only) 17 3.1.2 Solution 2: diode (DGND) in the ground line . 18 3.2 Load dump protection 18 3.3 MCU I/Os protection . 18 3.4 PowerSO-10 maximum demagnetization energy (V = 13.5 V) 19 CC 4 Package and PCB thermal data . 20 4.1 PowerSO-10 thermal data 20 5 Package and packing information . 23 5.1 ECOPACK packages . 23 5.2 PowerSO-10 mechanical data . 23 5.3 PowerSO-10 packing information . 25 6 Revision history . 26 2/27 Doc ID 10876 Rev 4