VNH7013XPTR-E STMicroelectronics

VNH7013XP-E Automotive integrated H-bridge Features Type R I V DS(on) out ccmax 13 m typ (1) VNH7013XP-E 40A 72V (per leg) 1. Per leg: sum of the two BV (HSD + LSD) dss V > 36 V whole bridge must be switched off CC Maximum V voltage: 72 V CC PowerSSO-36 TP 10 V compatible inputs R per leg: 13 m typical DS(on) Embedded thermal sensor: -8.1 mV/K Very low stray inductance in power line Description The VNH7013XP-E is an automotive integrated H-bridge intended for a wide range of automotive applications driving DC motors. The device incorporates a dual channel and two single channel MOSFETs. All the devices are designed using STMicroelectronics well known and proven proprietary VIPower M0-S7 technology that allows to integrate in a package four different channels in H-bridge topology. This package, specifically designed for the harsh automotive environment offers improved thermal performance thanks to exposed die pads. Moreover, its fully symmetrical mechanical design allows superior manufacturability at board level. Table 1. Device summary Order codes Package Tube Tape and reel PowerSSO-36 TP VNH7013XP-E VNH7013XPTR-E January 2012 Doc ID 022370 Rev 3 1/24 www.st.com 1Contents VNH7013XP-E Contents 1 Block diagram and pin description . 5 2 Electrical specifications 7 2.1 Absolute maximum rating 7 2.2 Electrical characteristics . 8 3 Package and PCB thermal data . 15 3.1 PowerSSO-36 thermal data . 15 3.1.1 Thermal calculation in clockwise and anti-clockwise operation in steady- state mode . 16 3.1.2 Thermal resistances definition (values according to the PCB heatsink area) . 17 3.1.3 Thermal calculation in transient mode 17 3.1.4 Single pulse thermal impedance definition (values according to the PCB heatsink area) 17 4 Package and packing information . 20 4.1 ECOPACK packages . 20 4.2 PowerSSO-36 TP package information 20 4.3 PowerSSO-36 TP packing information . 22 5 Revision history . 23 2/24 Doc ID 022370 Rev 3