VNL5030JTR-E STMicroelectronics

VNL5030J-E VNL5030S5-E OMNIFET III fully protected low-side driver Datasheet - production data Description The VNL5030J-E and VNL5030S5-E are monolithic devices made using STMicroelectronics VIPower technology, intended for driving resistive or inductive loads PowerSSO-12 with one side connected to the battery. Built-in SO-8 thermal shutdown protects the chip from overtemperature and short-circuit. Output current Features limitation protects the devices in an overload condition. In case of long duration overload, the device limits the dissipated power to a safe level Type V R I clamp DS(on) D up to thermal shutdown intervention.Thermal VNL5030J-E shutdown, with automatic restart, allows the 41 V 30 m 25 A device to recover normal operation as soon as a VNL5030S5-E fault condition disappears. Fast demagnetization of inductive loads is achieved at turn-off. Automotive qualified Drain current: 25 A ESD protection Overvoltage clamp Thermal shutdown Current and power limitation Very low standby current Very low electromagnetic susceptibility Compliant with European directive 2002/95/EC Open drain status output Table 1. Devices summary Order codes Package Tube Tape and reel PowerSSO-12 VNL5030J-E VNL5030JTR-E SO-8 VNL5030S5-E VNL5030S5TR-E November 2013 DocID022767 Rev 6 1/28 This is information on a product in full production. www.st.comContents VNL5030J-E/ VNL5030S5-E Contents 1 Block diagrams and pins configurations 5 2 Electrical specifications 7 2.1 Absolute maximum ratings . 7 2.2 Thermal data . 7 2.3 Electrical characteristics . 8 2.4 Electrical characteristics curves .11 3 Application information . 14 3.1 MCU I/O protection 14 4 Package and PC board thermal data . 16 4.1 PowerSSO-12 thermal data . 16 4.2 SO-8 thermal data 19 5 Package and packing information . 22 5.1 ECOPACK . 22 5.2 PowerSSO-12 mechanical data 22 5.3 SO-8 mechanical data . 23 5.4 PowerSSO-12 packing information . 25 5.5 SO-8 packing information . 26 6 Revision history . 27 2/28 DocID022767 Rev 6