VNQ5050KTR-E STMicroelectronics

VNQ5050K-E Quad channel high side driver for automotive applications Features Max supply voltage V 41 V CC Operating voltage range V 4.5 to 36 V CC PowerSSO-24 Max on-state resistance (per ch.) R 50 m ON Current limitation (typ) I 19 A LIMH Applications (1) Off-state supply current I 2A S All types of resistive, inductive and capacitive 1. Typical value with all loads connected loads General features Inrush current active management by Description power limitation The VNQ5050K-E is a monolithic device made Very low standby current using STMicroelectronics VIPower M0-5 3.0 V CMOS compatible input technology. It is intended for driving resistive or Optimized electromagnetic emission inductive loads with one side connected to Very low electromagnetic susceptibility ground. Active V pin voltage clamp protects the CC device against low energy spikes (see ISO7637 In compliance with the 2002/95/EC transient compatibility table). European directive Diagnostic functions The device detects open load condition both in on and off-state, when STAT DIS is left open or Open drain status output driven low. Output shorted to Vcc is detected in On-state open load detection the off-state. Off-state open load detection When STAT DIS is driven high, the STATUS pin Thermal shutdown indication is in a high impedance condition. Protection Output current limitation protects the device in Undervoltage shutdown overload condition. In case of long overload Overvoltage clamp duration, the device limits the dissipated power to Load current limitation a safe level up to thermal shutdown intervention. Self limiting of fast thermal transients Thermal shutdown with automatic restart allows Protection against loss of ground and loss the device to recover normal operation as soon as of V CC the fault condition disappears. Thermal shutdown Reverse battery protection (see Application Table 1. Device summary schematic on page 19) Electrostatic discharge protection Order code Package Tube Tape and reel PowerSSO-24 VNQ5050K-E VNQ5050KTR-E September 2013 Doc ID 10864 Rev 7 1/31 www.st.com 1 Contents VNQ5050K-E Contents 1 Block diagram and pin configuration . 5 2 Electrical specifications 7 2.1 Absolute maximum ratings . 7 2.2 Thermal data . 8 2.3 Electrical characteristics . 9 2.4 Electrical characteristics curves 15 3 Application information . 19 3.1 GND protection network against reverse battery . 19 3.1.1 Solution 1: resistor in the ground line (RGND only) 19 3.1.2 Solution 2: a diode (DGND) in the ground line . 20 3.2 Load dump protection 20 3.3 Microprocessor I/Os protection 20 3.4 Open-load detection in off-state 20 3.5 Maximum demagnetization energy (VCC = 13.5V) . 23 4 Package and PC board thermal data . 24 4.1 PowerSSO-24 thermal data . 24 5 Package and packing information . 27 5.1 ECOPACK packages . 27 5.2 PowerSSO-24 mechanical data 27 5.3 Packing information . 29 6 Revision history . 30 2/31 Doc ID 10864 Rev 7