VGE10077A Sunbank

Ruggedized Reverse Bayonet Connectors UTV SERIES Completely intermountable with VG 95234 : the MS 5015 reverse bayonet connectors Description This connector series is an enhanced version of the VG 95234 connec- tor standard but remains completely intermountable with VG 95234 : the MS 5015 reverse bayonet connec- tors. Features and benefits (see also page 3) An interfacial seal is present on the male inserts to extend the creepage distance and to have a better sealing when the connector is mated. The insulator is retained into the plug or receptacle shell by a metallic retaining ring which can be removed with a small screwdriver. Once removed, user can defined insulator orientation. Contacts gauge 8, 12 or 16 are machined crimp contacts, removable thanks to a clip on the contact. No tools are needed to insert contacts into the insulator. An extraction tool is available to extract the contacts. The tool is engaged by the front face of the connector and the contacts are rear released. Contacts are crimped thanks to very common toolings. The connector is rated 2 levels of water protection (see page 3): Dynamic IP67/IP68/IP69K when mated and used with suitable accessories, a grommet or a sealed back shell. This connector can be supplied fully assembled or in component form (please consult us). Corrosion spray resistance is rated up to 500 hours salt spray Cadmium and lead free materials are used 53 new Dynamic IP68 / IP69K Up to 500 hr salt spray VG95234 intermountableRuggedized Reverse Bayonet Connector Description Receptacle Yellow marking for locking end indication Wear pins Pin contact to crimp with metallic retention clip Retaining insulator ring Hard Thermoplastic insert Interfacial seal Receptacle shell Plug Roller Socket contact to crimp with metallic retention clip Retaining insulator ring Hard Thermoplastic insert Plug shell 54