HRG3216P-5902-B-T5 Susumu

HRG SUSUMU CO.,LTD High Power Thin Film Chip Resistor 1206 1W Power FEATURES Excellent reliability and stability even under harsh conditions Low noise, THIN FILM construction EIA Standard 1206 with 1W Power RoHS Compliance and 100% Lead-Free AEC-Q200 Qualified Anti- Sulfur Moisture Resistant APPLICATIONS Power supplies Power switching Braking system Test and measurement equipment Motor deflection circuits Electrical Specification Size Resistance Resistance Range (ohm) Type Power Rating TCR Packaging in inch) Tolerance *E24 & E96 seriesR value 25ppm/(P) 0.1%(B) 47 - 100k Tape & Reel 50ppm/(Q) HRG3216 1206 1.0W T1 = 1000pcs 25ppm/(P) 47 - 100k T5 = 5000pcs 0.5%(D) 50ppm/(Q) 10 - 100k Reliability Specification Test Item Test Method (JIS C5201-1) R Limits Under 47 (0.5%+0.05) Load Life 70, rated power, 90min. on/ 30min. Off, 1000hrs. 47 and higher (0.25%+0.01) o Temp. Hum. Bias 85 C 85% RH, 1/10 rated power, 90min. on/ 30min. Off, 1000hrs. Under 47 o o (0.25%+0.05) -55 C (30min)/room temp.(2min) /+125 C(30min)/room temp.(2min), Thermal Shock 47 and higher no bias, 1000 cycles (0.1%+0.01) o High Temp. Exposure 155 C for 1000h, no bias. Dimensions Unit (mm) Type HRG3216 Dimensions W 3.20.2 L 1.650.2 t 0.450.1 a 0.50.25 b1.1 0.2 www.susumu.co.jp 1 HRG SUSUMU CO.,LTD Recommended Land Pattern d Unit (mm) b a b d (*1) TYPE abc (Reference value) Solder Solder 27.00.1 3216 0.550.1 1.90.1 1.80.1 Resist Resist c (*1) Please give consideration to heat dissipation of the resistor. ChipComponment Solderpad The solder fillet when resistor is powered up should not exceed 155. Power Derating Curve (HRG3216) For operation above 70, power must be derated according to the following chart. However, in actual use, verify the fillet temperature is not exceeding 155. 100 AreaofRecommendedOperation 50 0 -55 0 50 70 150 100 Ambient Temperature www.susumu.co.jp 2 Percent of the rated dissipation