Product Fact Sheet Industrial TM CFast Card durabit the better MLC F-60 Series SATA Gen3 - 6.0 Gbit/s, MLC Commercial and Industrial Temperature Grade Date: October 22, 2019 Revision: 1.06 Product Fact Sheet F-60 Series Product Summary Capacities: 8 GBytes, 16 GBytes, 30 GBytes, 60 GBytes, 120 GBytes, 240 GBytes Form Factor: CFast-Sized Solid State Drive (36.4 mm x 42.8 mm x 3.6 mm) Compliance: SATA Gen3 - 6 Gbit/s (Gen2 - 3 Gbit/s and Gen1 - 1.5 Gbit/s backward compatible) Command Sets: Supports ATA/ATAPI-8 and ACS-2 Performance: o Read Performance: Sequential Read up to 520 MBytes/s, Random Read 4K up to 72,000 IOPS o Write Performance: Sequential Write up to 180 MBytes/s, Random Write 4K up to 43,000 IOPS Operating Temperature Range*: Commercial: 0 C to 70 C Industrial: -40 C to 85 C Storage Temperature Range: -40 C to 85 C Operating Voltage: 3.3 V 5% Power (Max Capacity): Read (Active): 1.3 W Write (Active): 1.6 W Idle: 363 mW Slumber: 115 mW Data Retention: 10 Years Life Begin / 1 Year Life End Endurance in TeraBytes Written (TBW) Max Capacity: Client > 540 Embedded > 145 Enterprise > 135 Shock/Vibration: 1,500 g / 50 g Hardware BCH Code ECC: up to 66 bit correction per 1 KByte page Mean Time Between Failure: > 2,000,000 hours 16 Data Reliability: < 1 non-recoverable error per 10 bits read Product Features Best-in-Class Performance and Endurance with dura bi t Technology Dynamic and Static Wear Leveling Active and Passive Data Care Management Lifetime Enhancements o Dynamic Bad Block Remapping o Write Amplification Reduction On-Board Power Fail Protection AHCI, TRIM, and NCQ Support ATA Security Feature Set Support DEVSLP Compatible In-Field Firmware Update Enterprise Grade Self-Monitoring, Analysis, and Reporting Technology (S.M.A.R.T.) AES256 Encryption (on request) 30 inch Gold-Plated Connector (on request) Swissbit Life Time Monitoring (SBLTM) Tool and SDK for SBLTM (on request) Why Swissbit Swissbit is focused on the design, development, manufacture, and support of leading edge memory and storage solutions for the worldwide OEM/ODM marketplace. As a global supplier, Swissbit recognizes and addressees the higher level of application requirements of todays industrial, Netcom, and automotive customers by providing best-in-class products and services, with uncompromised attention to driving overall value and quality. * Adequate airflow is required to ensure the temperature, as reported in the S.M.A.R.T. data, does not exceed 115C (industrial temperature drive) and 100C (commercial temperature drive) respectively. According to JEDEC (JESD47I), the time to write the full TBW is a minimum of 18 months. Higher average daily data volume reduces the specified TBW. The values listed are estimates and are subject to change without notice. Swissbit AG Revision: 1.06 Industriestrasse 4 Doc-2791 CH-9552 Bronschhofen www.swissbit.com File: F-60 fact sheet Rev106 Switzerland industrial swissbit.com Page 2 of 2