Product Fact Sheet Industrial SLIM SATA SSD (MO-297) X-600s Series SATA III - 6.0 Gbit/s X-600s Series Industrial Slim SATA Solid State Drive Product Summary Capacities: 16 GBytes, 32 GBytes, 64 GBytes, 128 GBytes Form Factor: JEDEC MO-297 Slim SATA Solid State Drive (54 mm x 39 mm x 4 mm) Compliance: SATA Rev 3.1 - 6 Gbit/s (3 Gbit/s and 1.5 Gbit/s backward compatible) Command Sets: Supports ATA/ATAPI-8 and ACS-2 Performance: o Read Performance: Sequential Read up to 520 MBytes/s, Random Read IOPs up to 76,000 o Write Performance: Sequential Write up to 405 MBytes/s, Random Write IOPs up to 73,000 * Operating Temperature Range : o Commercial: 0 C to 70 C o Industrial: -40 C to 85 C Storage Temperature Range: -40 C to 85 C Operating Voltage: 3.3 V 5% and 5 V 10% Power (Max Capacity): o 3.3V: Read (Active): 1.7 W Write (Active): 2.5 W Idle: 380 mW Slumber: 115 mW o 5V: Read (Active): 2.0 W (5 V) Write (Active): 2.9 W Idle: 550 mW Slumber: 275 mW Data Retention: 10 Years Life Begin 1 Year Life End Endurance in TeraBytes Written (TBW) Max Capacity : Client > 7,715 Embedded > 1,920 Enterprise > 1,100 Shock/Vibration: 500 g/20 g (MIL-STD810) Hardware BCH Code ECC: up to 66 bit correction per 1 KByte page Mean Time Between Failure: > 2,000,000 hours 16 Data Reliability: < 1 non-recoverable error per 10 bits read Product Features Dynamic and Static Wear Leveling Data Care Management o Active: Adaptive Read Refresh o Passive: Background Media Scan Lifetime Enhancements o Dynamic Bad Block Remapping o Write Amplification Reduction On-Board Power Fail Protection AHCI, TRIM, and NCQ Support ATA Security Feature Set Support In-Field Firmware Update Enterprise-Grade Self-Monitoring, Analysis, and Reporting Technology (S.M.A.R.T.) AES256 Encryption (on request) Swissbit Life Time Monitoring (SBLTM) Tool and SDK for SBLTM (on request) Why Swissbit Swissbit is focused on the design, development, manufacture, and support of leading edge memory and storage solutions for the worldwide OEM/ODM marketplace. As a global supplier, Swissbit recognizes and addressees the higher level of application requirements of todays industrial, Netcom, and automotive customers by providing best-in-class products and services, with uncompromised attention to driving overall value and quality. * Adequate airflow is required to ensure the drive temperature, as reported in the S.M.A.R.T. data, does not exceed the specified maximum operating temperature. According to JEDEC (JESD47I), the time to write the full TBW is 18 months. Higher average daily data volume reduces the specified TBW. Swissbit AG Revision: 1.05 Industriestrasse 4 CH-9552 Bronschhofen www.swissbit.com X-600s fact sheet Rev105.docx Switzerland industrial swissbit.com Page 2 of 2