Product Fact Sheet Industrial M.2 SATA SSD durabit the better MLC X-60m2 2242 Series SATA Gen3 - 6.0 Gbit/s, MLC Commercial and Industrial Temperature Grade Date: August 02, 2019 Revision: 1.09 Product Fact Sheet X-60m2 2242 Series Product Summary Capacities: 30 GBytes, 60 GBytes, 120 GBytes, 240 GBytes Form Factor: PCI Express M.2 (2242) (42 mm x 22 mm x 3.58 mm) Compliance: SATA Gen3 - 6 Gbit/s (Gen2 - 3 Gbit/s and Gen1 - 1.5 Gbit/s backward compatible) Command Sets: Supports ATA/ATAPI-8 and ACS-2 Performance: o Read Performance: Sequential Read up to 520 MBytes/s, Random Read 4K up to 72,000 IOPS o Write Performance: Sequential Write up to 340 MBytes/s, Random Write 4K up to 78,000 IOPS * Operating Temperature Range : o Commercial: 0 C to 70 C o Industrial: -40 C to 85 C Storage Temperature Range: -40 C to 85 C Operating Voltage: 3.3 V 5% Power (Max): Read (Active): 1.3 W Write (Active): 1.6 W Idle: 363 mW Slumber: 115 mW Data Retention: 10 Years Life Begin 1 Year Life End Endurance in TeraBytes Written (TBW) Max Capacity: Client > 485 Embedded > 140 Enterprise > 115 Shock/Vibration: 1,500 g / 50 g Hardware BCH Code ECC: up to 66 bit correction per 1 KByte page NAND Flash Technology: Multi-Level Cell (MLC) Mean Time Between Failure: > 2,000,000 hours 16 Data Reliability: < 1 non-recoverable error per 10 bits read Product Features Best-in-Class Performance and Endurance with dura bi t Technology Dynamic and Static Wear Leveling Subpage Mode Flash Translation Layer (FTL) Active and Passive Data Care Management Lifetime Enhancements o Dynamic Bad Block Remapping o Write Amplification Reduction On-Board Power Fail Protection AHCI, TRIM, and NCQ Support ATA Security Feature Set Support DEVSLP Compatible In-Field Firmware Update Enterprise-Grade Self-Monitoring, Analysis, and Reporting Technology (S.M.A.R.T.) 30 inch Gold-Plated Connector (IPC-6012B Class 2 Compliant) AES256 Encryption (on request) Swissbit Life Time Monitoring (SBLTM) Tool and SDK for SBLTM (on request) Why Swissbit Swissbit is focused on the design, development, manufacture, and support of leading edge memory and storage solutions for the worldwide OEM/ODM marketplace. As a global supplier, Swissbit recognizes and addressees the higher level of application requirements of todays industrial, Netcom, and automotive customers by providing best-in-class products and services, with uncompromised attention to driving overall value and quality. * Adequate airflow is required to ensure the temperature, as reported in the S.M.A.R.T. data, does not exceed 115C (industrial temperature drive) and 100C (commercial temperature drive) respectively. According to JEDEC (JESD47I), the time to write the full TBW is a minimum of 18 months. Higher average daily data volume reduces the specified TBW. The values listed are estimates and are subject to change without notice. Swissbit AG Revision: 1.09 Industriestrasse 4 Doc-2719 CH-9552 Bronschhofen www.swissbit.com File: X-60m2 2242 fact sheet Rev109 Switzerland industrial swissbit.com Page 2 of 2