CUT75 Series 75W Dual or Triple Output Low Pro le Power Supplies Features 3 x 5 x 1.06 footprint Output 1 isolated from outputs 2 & 3 No minimum loading Convection Cooled Three year warranty Key Market Segments & Applications Speci cations Model CUT75-522 CUT75-5FF AC Input Voltage (1) VAC 85 - 265VAC Input Frequency Hz 47 - 63Hz DC Input Voltage VDC 120 - 370VDC (No safety certi cation) Inrush Current (cold start) A 18A at 100VAC, 36A at 200VAC Power Factor - Meets EN61000-3-2 Input Current (100 / 200VAC) A 2 / 1 Temp. Coe cient (-20 to +70C) - V1: <0.02%/C, V2 & 3 <0.03%/C Overcurrent Protection - > 105% Overvoltage Protection (2) V V1: 5.7-7.0, V2: 13.8 - 18.8V V1: 5.7-7.0, V2: 17.2 - 21.0V E ciency (Typical) % 85% at 200VAC input Hold Up Time (115 / 230V input) ms 20ms Leakage Current (265VAC 50Hz) mA <0.3mA Operating Temperature (3) - -20 to +70C. Derate linearly to 60% load from +50 to +70C Storage Temperature - -30 to +85C Op. Humidity (non condensing) - 5 - 95% RH Cooling - Convection Withstand Voltage - Input to Ground 2kVAC, Input to Output 3kVAC, Output to Ground 500VAC, V1 to V2 / V3 500VAC for 1 min. Isolation Resistance - >100M at 25C & 70%RH, Output to Ground 500VDC 2 Vibration (non operating) - 10 - 55Hz: 19.6m/s constant sweep 1 min X, Y, Z for 1 hour 2 Shock - < 196.1 m/s (20G) Immunity - IEC61000-4-2 (lv 3, 4), -3 (lv3), -4 (lv 4), -5 (lv3, 4), -6 (lv 3), -8 (lv 4), -11 Safety Agency Certi cations - IEC/UL/CSA/EN 62368-1 (cTUVus), IEC/UL/CSA/EN 60950-1 (cTUVus), CE Mark ANSI/AAMI ES60601-1, CSA 60601-1, IEC/EN60601-1 (2 x MOOP) Conducted & Radiated EMI - EN55011/EN55022-B, FCC--B Weight (Typ) g 210 (open frame version) Size (WxLxH) in (mm) 3 x 5 x 1.06 (76 x 127 x 27) Warranty - Three Years (1) Derate linearly to 60% load from 100VAC to 85VAC input (2) Cycle AC to reset (3) See derating curves in installation manual for all mounting orientatonsCUT75 Series Model Selector Adjust Max Max Load Reg Line Reg Ripple Noise Model Voltage (V) Range (V) Current (A) Power (W) (mV) (mV) (mV) V 1 5V 5.0 - 5.25 8 40 100 50 120 CUT75-522 V2 +12V Fixed 3 600 240 150 36 V3 -12V Fixed 1 600 240 150 V1 5V 5.0 - 5.25 8 40 100 50 120 V2 24V Fixed 1 24 750 300 150 CUT75-522 (Leave common terminal unconnected) V1 5V 5.0 - 5.25 8 40 100 50 120 CUT75-5FF V2 +15V Fixed 2.5 750 300 150 37.5 V3 -15V Fixed 1 750 300 150 V1 5V 5.0 - 5.25 8 40 100 50 120 V2 30V Fixed 1 30 750 300 150 CUT75-5FF (Leave common terminal unconnected) Note: CUT75 can be con gured as a dual or triple output. Outline Drawing Similar Models SC40-60 3x5 40W to 60W 1 to 3 outputs ZPT 2x4 40W 1 to 3 outputs NV175 3x5 175W, 1 to 4 outputs ZMS100 2x4 100W single output For additional information, please visit