iCH Series 85W, 12A Non-isolated SMT Point of Load Features DOSA Compatible Footprint Surface Mountable Constant Switching Frequency No external loop tuning components needed Excellent Transient Response Key Market Segments & Applications Speci cations Model iCH12 DC Output Voltage V 0.7 - 8.5 DC Output Power (max) W 85 DC Input Voltage V 4.5 - 14 E ciency % 88.5 - 97 Output Voltage Tolerance % 3 Switching Frequency kHz 500 Line Regulation mV 5 Load Regulation mV 6 External Load Capacitance uF 200 - 2000 Output Ripple and Noise mVpp 15 Overcurrent Protection A 22A typical Remote On / O - Positive or Negative Logic available, see Model Selector Remote Sense - (+) Sense, compensating up to 0.5V Power Good - Yes, Low on fail Operating Temperature C -40 to 115 (see thermal data on website) Storage Temperature C -55 to 125 Safety Agency Certi cations - IEC/UL/CSA/EN62368-1, 60950-1, CE Mark Weight g / oz 2.5g / 0.088 oz Size (LxWxH) mm / in. 12.2 x 12.2 x 8.5 / 0.48 x 0.48 x 0.335 Warranty yrs 3 years iCH Series Model Selector Input Input Output Output Positive Logic Negative Logic Model Voltage (V) Current (A) Voltage (V) On/O On/O iCH12012A007V-007-R 4.5 - 14 12 0.7 - 8.5 - yes ICH12012A007V-006-R 4.5 - 14 12 0.7 - 8.5 yes - Prefered Model Outline Drawing Pinout PIN Function PIN Function 1 ON / OFF 8 Not Fitted 2 VIN 9 Not Connected 3 GND 10 PWR GOOD 4 VOUT 11 Not Fitted 5 SENSE (+) 12 VIN 6 TRIM 13 GND 7 GND 14 VOUT Other Industrial Products CC-E 1.5 - 30W 5, 12, 24 or 48V input isolated DC-DC converters PX 10 - 60W 12, 24 or 48V input isolated DC-DC converters iAH, iBF, iBH, iCF, iCG 3 - 20A DOSA2 non isolated DC-DC converters iJA, iJB 35 - 60A non isolated DC-DC converters with PMBus For Additional Information, please visit