EMI
Noise filter
MC13-SERIES
m Features
(1) 2 mounting options :
MC13** Screw mounting type
MC13**DIN Din rail mounting type
(2) Worldwide compliance :
Voltage rating 3 phase AC500V, 10, 20, 30A
(3) Safe design :
Terminal with cover, Low leakage current
(4) Environmental compliance : Lead free soldering
m Safety standard
UL1283
CSA Std. C22. 2 No. 8
EN133200
EN133200
m Specifications
Model STD type MC1306 MC1310 MC1320 MC1330
Items DIN type MC1306DIN MC1310DIN MC1320DIN MC1330DIN
1 Rated Voltage (AC) 500V (50/60Hz)
2 Rated Current (*1) 6A 10A 20A 30A
3 Test Voltage (terminals to base plate, 1min AC) 2000V (100mA) at 25C, 70% RH
4 Isolation Resistance (terminals to base plate, 500VDC) 100M min at 25C, 70% RH
5 Leakage Current 500V,60Hz 5.0mA max
6 DC Resistance (three lines) 90m max 68m max 23m max 11m max
7 Temperature Rise 30C max
8 Operating Temperature -25C ~ +85C
9 Operating Humidity 30% ~ 95% RH (No Dewdrop)
10 Storage Temperature -40C ~ +85C
11 Storage Humidity 10% ~ 95% RH (No Dewdrop)
2
At no operating 10~55~10Hz, Amplitude (Sweep for 1min) 0.825mm constant (Maximum 49.0m/s )X,Y,Z 1hour each
MC13**
2
At no operating 55~250~55Hz, Acceleration (Sweep for 1min) 19.6m/s , X,Y,Z 1hour each
12 Vibration
2
MC13**DIN At no operating 10~55~10Hz, Acceleration (Sweep for 1min) 9.8m/s , X,Y,Z 1hour each
13 Weight 600g
<
(Note) : Value for Ta=50C For Ta>50C derate according to the derating curve shown on the right.
m Circuit m Derating
Temperature (C)
m Terminal Explanation
v Request customer specification for further details of specifications, outline, characteristics, etc.
Read the instruction manual before usage.
v Contact us about delivery before ordering.
163
Current (%)MC13-SERIES
m MC13
**
(Unit: mm)
m MC13 DIN
**
(Unit: mm)
m MC13 DIN explanation
**
*Mounting *Ground
MC13 DIN could be mounted on 35mm wide (TS35 type) Din-rail.For mounting, Do not earth whth Din-rail.
**
put the part (A) of the unit over the top hat rail and push forward like (B), so that Earth directly from the ground terminal of
the rail stopper is firmly held on the Din-rail. For unmounting, put a screw driver MC13 DIN.
**
int the part (C) and lift it up to remove the unit.
164
EMI
Noise filter