SWS Series Single Output General Purpose Power Supplies Features Low Cost Power Factor Correction to EN61000-3-2 Universal Input (85 - 265VAC) Input Transient Protected IEC61000-4 Enclosed Global safety Approvals Level B EMI Key Market Segments & Applications Speci cations Model SWS50 SWS75 SWS100 SWS150 Input Voltage range (1) - 85 - 265VAC (47 - 63Hz) or 120 - 370VDC* Inrush Current (115/230VAC) A 20/40 16/32 Power Factor - Meets EN61000-3-2 Input Current (115/230VAC) A 1.2/0.6 1.6/0.8 1.2/0.6 1.8/0.9 Temperature Coe cient - <0.02%/C Total Regulation - <5% Overcurrent Protection - >105%, Constant Current Style Overvoltage Protection V 115 -135%, Cycle AC line to reset Hold Up Time (Typ) ms 20ms at 115VAC Leakage Current Max. mA 1mA (0.6mA typ 230VAC) 0.75mA (0.5mA typ 230VAC) Remote Sense - Not Available LED Indicator - Green LED = On Operating Temperature - -10 to +70C (See table for derating - model speci c) Storage Temperature - -30 to +85C Operating Humidity (2) C 30 - 90% RH Storage Humidity (2) C 10 - 95% RH Cooling - Convection Withstand Voltage - Input to Ground 2kVAC, Input to Output 3kVAC, Output to Ground 500VAC for 1 min. Isolation Resistance - >100M at 25C & 70%RH, Output to Ground 500VDC 2 Vibration (non operating) - 19.6m/s (10 - 55Hz (constant sweep 1 min) X, Y, Z for 1 hour) 2 Shock - < 196.1 m/s (20G) Safety Agency Approvals - UL60950-1, CSA60950-1, EN60950-1, CE Mark, EN50178 Conducted & Radiated EMI - EN55011 / EN55022-B, FCC Class B, VCCI-B Recommended EMI Filter - RSEL-2002W RSEL-2003W RSEL-2002W RSEL-2003W Immunity - EN61000-4-2,-3,-4,-5,-6,-8,-11 Weight (Typ) g 400 480 600 750 Size (WxHxD) in 3.62 x 1.46 x 6.26 3.7 x 1.69 x 6.69 3.78 x 1.77 x 7.4 3.9 x 2 x 7.8 Warranty yrs Two Years (1) Derate to 85% load below 100VAC input (2) non condensing *Safety certi ed for AC input only O B S O L E T E 1-800-526-2324 www.us.tdk-lambda.com/lp/ 93 Disclaimer: us.tdk-lambda.com/lp/legal.htmSWS Series Model Selector SWS50 Outline Drawing Adjust Max Load Line Ripple E . Model Voltage Range Curr. Reg mV Reg mV Noise (typ)% SWS50-3 3.3V 3-3.6V 10 40 20 80 73/70 SWS75-3 3.3V 3-3.6V 15 40 20 80 72/68 SWS100-3 3.3V 3-3.6V 20 40 20 100 69/70 SWS150-3 3.3V 3-3.6V 30 40 20 100 70/72 SWS50-5 5V 4.5-5.5V 10 50 20 80 77/75 SWS75-5 5V 4.5-5.5V 15 50 20 80 77/74 SWS100-5 5V 4.5-5.5V 20 40 20 100 75/77 SWS150-5 5V 4.5-5.5V 30 40 20 100 76/78 SWS50-12 12V 10.8-13.2V 4.3 96 48 80 82/79 SWS75-12 12V 10.8-13.2V 6.3 96 48 80 83/81 SWS100-12 12V 10.8-13.2V 8.5 96 48 100 79/81 SWS75 Outline Drawing SWS150-12 12V 10.8-13.2V 12.5 96 48 100 79/82 SWS50-15 15V 13.5-16.5V 3.5 120 60 100 84/80 SWS75-15 15V 13.5-16.5V 5 120 60 100 85/82 SWS100-15 15V 13.5-16.5V 6.7 120 60 100 81/83 SWS150-15 15V 13.5-16.5V 10 120 60 100 81/83 SWS150-18 18V 16.2-19.8V 8.4 144 72 120 82/84 SWS50-24 24V 21.6-26.4V 2.1 144 96 100 84/80 SWS75-24 24V 21.6-26.4V 3.2 144 96 100 85/82 SWS100-24 24V 21.6-26.4V 4.3 144 96 150 82/84 SWS150-24 24V 21.6-26.4V 6.3 144 96 150 82/85 Veritcal Mount Convection 25C 30C 35C 40C 45C 50C 55C 60C SWS50 100% 100% 100% 100% 100% 100% 93% 85% SWS75 (3.3-5V) 100% 100% 100% 100% 93% 85% 73% 60% SWS100 Outline Drawing SWS75 (12V-24V) 100% 100% 100% 100% 100% 93% 85% 60% SWS100 100% 100% 100% 100% 100% 87% 73% 60% SWS150 (3.3-5V) 100% 95% 90% 85% 73% 60% - - SWS150 (12V-24V) 100% 100% 100% 100% 100% 100% 80% 60% 1.2m/s Forced Air 50C 55C 60C 65C 70C SWS75 100% 100% 90% 80% 70% SWS100 100% 100% 90% 80% 70% SWS150 100% 100% 90% 80% 70% Derate to 80% load from 0 to -10C Other Industrial Products HWS 15W to 1500W Single Output LS 25W to 200W Low Cost SWS300/600/1000 300W to 1000W (Higher Power) SWS150 Outline Drawing Options Su x Descriptor /CO2 Double sided conformal coating For Additional Information, please visit us.tdk-lambda.com/lp/products/sws-series.htm O B S O L E T E 1-800-526-2324 www.us.tdk-lambda.com/lp/ 94 Revision B9: Feb 2019