EMC filters 3-line sine-wave EMC output filters SineFormer 520 V AC, 6 A ... 320 A, 40 C Series/Type: B84143V*R127 Date: February 2016 EPCOS AG 2016. Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without EPCOS prior express consent is prohibited. EPCOS AG is a TDK Group Company.Line reactors, output chokes and output filters B84143V*R127 3-line sine-wave EMC output filters SineFormer Filters for converters and power electronics Rated voltage V : 520 V AC, 50/60 Hz R Rated current I :6Ato320A R Construction 3-line filters, sine-wave EMC output filters Metal case Features Supersede shielded motor cables Motor noise reduction Reduced motor bearing current Low dv/dt values - reduced eddy current losses Easy to install Compact design 1) Degree of protection: IP20 Optimized for long motor cables up to 1000 m and 2) operation under full load No integrated forced ventilation (maintenance-free) No DC-link connection required Design complies with EN 60939, UL 1283, CSA 22.2 No.8 UL and cUL approval (except 6 A, 45 A, 320 A) Typical applications Frequency converters for motor drives, e.g. elevators pumps traction and conveyer systems HVAC systems (heating, ventilation and air conditioning) Terminals Line side (to converter): up to 180 A: shielded cable 320-A filter: copper busbars Load side (to motor): up to 180 A: Finger-safe terminal blocks 320-A filter: copper busbars Marking Marking on component: Manufacturers logo, ordering code, rated voltage, rated current, rated motor frequency, rated switch frequency, rated temperature, climatic category, date code, approvals Minimum data on packaging: Manufacturer s logo, ordering code, quantity, date code 1) According to IEC 60529 2) The maximum permissible motor cable length depends on the application and must be checked. Please read Cautions and warnings and Page2of13 Important notes at the end of this document.