SPEC. No. SPECIFICATION DATE: To CUSTOMERS PRODUCT NAME TDKS PRODUCT NAME Ceramic insulated capacitors disc type for low dissipation (RR type) TYPE RECEIPT CONFIRMATION DATE: YEAR MONTH DAY TDK Corporation Sales Engineering Electronic Components Sales & Ceramic Capacitors Business Group . Marketing Group APPROVED Person in charge APPROVED CHECKED Person in charge SPEC No. Handling precautions for High voltage ceramic capacitors Please read the following closely before using these products. Safety precautions The following precautions should be observed strictly to ensure safety design. Misuse of the product may lead to smoking of the product. Cautions 1.Operating voltage Use within the rated voltage of capacitor between terminals. For DC rated voltage application, you should control the peak voltage (Vo-p) under the rated voltage in case the AC voltage is superimposed on the DC voltage. Use within the rated voltage includes peak voltage (Vp-p) when AC voltage or impulse voltage applied in a circuit. Confirm irregular voltage (surge voltage, static electricity, switching noise, etc) occurs in the equipment used, and use within the rated voltage containing the irregular voltage. When the capacitor is used as a noise suppressor in the AC primary circuit, the voltage proof test should be within the specified conditions (voltage, time, wave form, etc). Connect by confirmation of non lose contact, and the voltage is started to apply to the circuit from zero to the specified voltage and it is stopped applying from the voltage to zero. Voltage (1) DC voltage (2) DCAC voltage (3) AC voltage (4) Pulse voltage Voltage 0 V V Measuring V V P-P 0-P P-P 0-P position 0 0 2. Operating temperature Be sure to use only those operating temperature described in our catalogue or specification. Keep the surface temperature under the maximum temperature, which includes the maximum self-heat temperature of 20 degree C. 3. Self-exothermal Self-exothermal temperature should be within 20 degree C on the condition of atmosphere temperature 25 degree C without the influence of wind such as the cooling fan. Be sure to use a capacitor in a circuit of current increase by AC voltage or pulse voltage applied. When high frequency voltage or impulse voltage applied in a circuit, reliability should be influenced. Take into considerations the load reduction and self-exothermal temperature, even if voltage should be within the rated voltage. PLP Spec No. HV095F19 SPEC No.