(1/3) Conformity to RoHS Directive SMD Inductors(Coils) For Signal Line(Multilayer, Magnetic Shielded) MLF Series MLF1005 Various kinds of digital equipment are becoming smaller with more PRODUCT IDENTIFICATION advanced functions. Therefore, parts used in such digital MLF 1005 DR10 K T (1) (2) (3) (4) (5) equipment need to be small and thinner. MLFI005 Series inductors were developed to meet these demands. This series of inductors have 75% less mass than (1) Series name conventional MLF1608 inductors and are magnetically sealed just like conventional inductors, making high-density mounting (2) Dimensions L W possible. 1005 1.0 0.5 0.5 FEATURES (3) Material code 75% less mass than the MLF1608 series. Magnetically sealed configuration allowing for high-density (4) Inductance value mounting. R10 0.1H Does not contain lead and is compatible with lead-free 1R0 1.0H soldering. It is a product conforming to RoHS directive. (5) Inductance tolerance K 10% APPLICATIONS Signal processing modules such as mobile phones and tuners (6) Packaging style T Taping reel SPECIFICATIONS Operating temperature range 40 to +85C Storage temperature range 40 to +85C PACKAGING STYLE AND QUANTITIES Packaging style Quantity Taping 10000 pieces/reel RECOMMENDED SOLDERING CONDITION REFLOW SOLDERING HANDLING AND PRECAUTIONS Before soldering, be sure to preheat components. 10s max. The preheating temperature should be set so that the tempera- 250 to 260C ture difference between the solder temperature and product Natural cooling 230C temperature does not exceed 150C. After mounting components onto the printed circuit board, do not 180C apply stress through board bending or mishandling. The inductance value may change due to magnetic saturation if 150C the current exceeds the rated maximum. Preheating Soldering Do not expose the inductors to stray magnetic fields. 60 to 120s 30 to 60s Avoid static electricity discharge during handling. Time(s) When hand soldering, apply the soldering iron to the printed cir- cuit board only. Temperature of the iron tip should not exceed 350C. Soldering time should not exceed 3 seconds. Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications. Please contact our Sales office when your application are considered the following: The devices failure or malfunction may directly endanger human life (e.g. application for automobile/aircraft/medical/nuclear power devices, etc.) All specifications are subject to change without notice. 002-04 / 20090402 / e511 mlf1005.fm(2/3) SHAPES AND DIMENSIONS/RECOMMENDED PC BOARD PATTERN 1.00.05 0.1min. 0.1min. 0.5 0.4 0.5 Dimensions in mm Net weight : 1.2mg ELECTRICAL CHARACTERISTICS Test Test Self-resonant Inductance Inductance DC resistance Rated current Part No. frequency current Q min. frequency (H) tolerance ( )max. (mA)max. L, Q (MHz) L, Q (mA) (MHz)min. MLF1005DR10K 0.1 10% 25 1.0 10 450 0.60 25 MLF1005DR12K 0.12 10% 25 1.0 10 400 0.70 25 MLF1005DR15K 0.15 10% 25 1.0 10 350 0.80 25 MLF1005DR18K 0.18 10% 25 1.0 10 320 0.90 25 MLF1005DR22K 0.22 10% 25 1.0 10 290 1.10 25 MLF1005DR27K 0.27 10% 25 1.0 10 260 1.30 25 MLF1005DR33K 0.33 10% 25 1.0 10 230 1.50 25 MLF1005AR39K 0.39 10% 10 1.0 25 210 0.60 10 MLF1005AR47K 0.47 10% 10 1.0 25 190 0.65 10 MLF1005AR56K 0.56 10% 10 1.0 25 170 0.70 10 MLF1005AR68K 0.68 10% 10 1.0 25 150 0.80 10 MLF1005AR82K 0.82 10% 10 1.0 25 130 0.90 10 MLF1005A1R0K 1.0 10% 10 1.0 25 120 1.00 10 MLF1005A1R2K 1.2 10% 10 1.0 25 110 1.10 10 MLF1005A1R5K 1.5 10% 10 1.0 25 100 1.30 10 MLF1005A1R8K 1.8 10% 10 1.0 25 90 1.55 10 MLF1005A2R2K 2.2 10% 10 1.0 25 80 1.80 10 Test equipment(L, Q): Ag-4294A or equivalent Test tool: Ag-16034G or equivalent TYPICAL ELECTRICAL CHARACTERISTICS INDUCTANCE vs. FREQUENCY CHARACTERISTICS 10 2.2H 1 1.0H 0.33H 0.1 0.1H 0.01 1 10 100 1000 10000 ( ) Frequency MHz Q vs. FREQUENCY CHARACTERISTICS IMPEDANCE vs. FREQUENCY CHARACTERISTICS 60 10000 0.33H 50 2.2H 1000 2.2H 40 1.0H 0.1H 30 100 1.0H 0.33H 20 0.1H 10 10 0 1 1 10 100 1000 10000 1 10 100 1000 10000 ( ) ( ) Frequency MHz Frequency MHz All specifications are subject to change without notice. 002-04 / 20090402 / e511 mlf1005.fm ( ) Q Inductance H 0.50.05 0.50.05 0.5 ( ) Impedance