(1/2)
Conformity to RoHS Directive
Chip Beads(SMD)
For Power Line
MPZ Series MPZ1005 Type
FEATURES SHAPES AND DIMENSIONS/RECOMMENDED PC BOARD
TDK has manufactured MPZ1005 type as EMI countermeasure PATTERN
product for power line. 10.05
This type is the best for energy-saving in the low DC resistance.
No cross talk with closed magnetic circuit structural design.
It is a product conforming to RoHS directive.
0.5 0.4 0.5
0.1min.
APPLICATIONS
Weight: 1mg
Removal of power line noises of cellular phones, PCs, note PCs,
Dimensions in mm
TVs, TV tuners, STBs, audio players, DVDs, DSCs, DVCs, game
machines, digital photo frames, car navigation system, PNDs, etc.
TEMPERATURE RANGES
PRODUCT IDENTIFICATION
Operating/storage 40 to +85C
MPZ 1005 S 121 C T
(1) (2) (3) (4) (5) (6)
PACKAGING STYLE AND QUANTITIES
Packaging style Quantity
(1) Series name
Taping 10000 pieces/reel
(2) Dimensions LW
(3) Material code
RECOMMENDED SOLDERING CONDITION
(4) Nominal impedance [at 100MHz]
REFLOW SOLDERING
(5) Characteristic type
(6) Packaging style
T:Taping(reel)
10s max.
250 to 260C
Natural
HANDLING AND PRECAUTIONS
cooling
230C
Before soldering, be sure to preheat components. The preheat-
ing temperature should be set so that the temperature difference
180C
between the solder temperature and product temperature does
not exceed 150C.
150C
After mounting components onto the printed circuit board, do not
Preheating Soldering
apply stress through board bending or mishandling. 60 to 120s 30 to 60s
Do not expose the inductors to stray magnetic fields.
Time(s)
Avoid static electricity discharge during handling.
When hand soldering, apply the soldering iron to the printed cir-
cuit board only. Temperature of the iron tip should not exceed ELECTRICAL CHARACTERISTICS
Impedance DC resistance Rated current
350C. Soldering time should not exceed 3 seconds.
Part No.
( )[100MHz] ()max. (A)max.
MPZ1005S100C 105 0.045 2.0
MPZ1005S300C 3010 0.050 1.7
MPZ1005S600C 6025% 0.075 1.5
MPZ1005S121C 12025% 0.090 1.2
MPZ1005Y900C 9025% 0.100 1.2
Test equipment: E4991A or equivalent
Test tool: 16192A or equivalent
Test temperature: 2510C
Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific
bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications.
Please contact our Sales office when your application are considered the following:
The devices failure or malfunction may directly endanger human life (e.g. application for automobile/aircraft/medical/nuclear power devices, etc.)
All specifications are subject to change without notice.
004-02 / 20100303 / e9413_mpz1005.fm
0.50.05 0.50.05
0.5(2/2)
TYPICAL ELECTRICAL CHARACTERISTICS
Z, X, R vs. FREQUENCY CHARACTERISTICS
MPZ1005S100C MPZ1005S300C MPZ1005S600C
20 60 100
18 90
50
16
80
14 70
40
Z
Z
12 60
Z R
10 30 50
R R
8 40
20
6 30
4
20
10
X X
X
2
10
0 0 0
1 10 100 1000 10000 1 10 100 1000 10000 1 10 100 1000 10000
( ) ( ) ( )
Frequency MHz Frequency MHz Frequency MHz
MPZ1005S121C MPZ1005Y900C
250
200
180
200
160
140
Z
Z
150
120
R
100
R
100
80
60
X
50
40
X
20
0
0
1 10 100 1000 10000
1 10 100 1000 10000
Frequency(MHz)
( )
Frequency MHz
PACKAGING STYLES
REEL DIMENSIONS TAPE DIMENSIONS
+0.1
Sprocket hole 1.5 Cavity
0.0
1.0
0.8max. 0.650.1 4.00.1
2.00.05 2.00.05
+2.0
2.00.5 8.4
0.0
160min. Taping 200min.
130.2
14.4max.
210.8
1802.0
Dimensions in mm
Drawing direction 300min.
Dimensions in mm
All specifications are subject to change without notice.
004-02 / 20100303 / e9413_mpz1005.fm
( )
Impedance ( )
Impedance
60min.
( ) ( )
Impedance Impedance
( )
Impedance
1.150.1
1.750.1
3.50.05
8.00.3