SPECIFICATION CONTROL DRAWING
MATERIALS
1. INSULATION SLEEVE: Heat-shrinkable, transparent blue, radiation cross-linked modified polyvinylidene
fluoride.
2. TOP SEAL: Low outgassing thermoplastic, color-blue.
3. MULTI-CONDUCTOR SEAL: Low outgassing thermoplastic, color-natural.
4. CRIMP SPLICE: Base Metal: Copper Alloy 102 per ASTM B-75.
Plating: Tin per MIL-T-10727, Type 1.
CMA Range: 1900 - 6755
APPLICATION
1. This part is designed to make an immersion resistant stub splice in wires having insulations rated for at least
135 C.
2. Wire Accomodation:
Jacket O.D.: 2.01 (0.079) max
Gauge CMA Number
16 2426 2
18 1919 2 3
20 1216 2 5
22 754 3 - 5
3. Parts will meet performance requirements of MIL-S-81824/1.
TITLE :
THERMOFIT
(5 at 2.03 (0.080)
DEVICES
300 Constitution Drive
STUB SPLICE SEALING SYSTEM,
Menlo Park, CA 94025, USA
16/12 SPLICE
UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS.
DOCUMENT NO.: D-436-0127
INCHES DIMENSIONS ARE BETWEEN BRACKETS.
TOLERANCES: ANGLES: N/A Raychem reserves the right to amend this DCR NUMBER: REPLACES:
0.00 N/A drawing at any time. Users should
D001279 N/A
0.0 N/A ROUGHNESS IN evaluate the suitability of the product for
0 N/A MICRON their application.
DRAWN BY: DATE: PROD. REV. DOC ISSUE: SCALE: SIZE: SHEET:
M. FORONDA 14-Nov.-00 C 1 None A 1 of 1
If this document is printed it becomes uncontrolled. Check for the latest revision.