General Purpose Relays
Interface Power Relay RT
1 pole 12 / 16 A, 2 pole 8 A, 1 CO contact or 2 CO contacts
DC- or AC coil
Sensitive coil 400 mW
Reinforced insulation, protection class II (VDE 0700)
5 kV / 10 mm coil-contact
1pole 12 A with 3.5 or 5 mm pinning
Recycleable packaging
RoHS compliant (Directive 2002/95/EC)
as per product date code 0413
F0269-A
Applications
Panel boards, mechanical engineering
Approvals
V REG.-Nr. 6106, Z E214025
Technical data of approved types on request
Contact data 1-pole 2-pole
Contact configuration 1 CO 2 CO
Contact set single contact
Type of interruption micro disconnection
Rated current 12 / 16 A 8 A
Rated voltage / max.switching voltage AC 240/400 VAC
Maximum breaking capacity AC 3000 / 4000 VA 2000 VA
Limiting making capacity,max 4 s, df 10% 25 / 30 A 15 A
Contact material AgNi 90/10
6 6
Mechanical endurance DC coil > 30 x 10 >30x10
6 6
AC coil > 10 x 10 >5 x 10
-1
Rated frequency of operation with / without load 6 / 1200 min
Contact ratings
Type Load Cycles
3
RT314 16 A, 250 VAC, NO contact, 85C, DF 10%, UL508 50x10
-1 3
RT314 16 A, 250 VAC, NC contact, 70C, 30min 53x10
3
RT314 16 A, 250 VAC, CO contact, VDE 0435 30 x 10
3
RT314 1000 W incandescent lamp, 250 VAC 1.2x10
3
RT314 10 A, 250 VAC, cos=0.6, CO contact, 70C 200x10
-1 6
RT314 5 A / 2 A, 250 VAC, cos=1, motor, NO contact, 10min , 70C 1.1x10
RT314 Pilot duty A300 (NO contact), B300 (CO/NC contact), UL508
RT314 1hp @ 240 VAC, 1/2hp @ 120 VAC, NO contact, UL508
RT314 AC15, 6 A, 250 VAC, NO and NC contact, 85C, EN60947-5-1
RT314 DC13, 2 A / 24 VDC, 0.2 A / 250 VDC, NO and NC contact, 85C, EN60947-5-1
3
RT424 8 A, 250 VAC, NO contact, 70C, EN61810-1 100x10
3
RT424 6(2) A, 250 VAC, NO/NC contact, 85C; EN60730-1 100x10
RT424 1/2hp @ 240 VAC, 1/4hp @ 120 VAC, UL508
RT424 Pilot duty B300, UL508
RT424 8 A, 30 VDC, General Purpose, UL508
Coil data
Rated coil voltage range DC coil 5...110 VDC
AC coil 24...230 VAC
Coil power DC coil typ 400 mW
AC coil typ 0.75 VA
Operative range 2
Coil insulation system according UL1446 class F
1
Datasheet Rev. EK1 Dimensions are in mm unless Product specification processing information Schrack section.
Issued 2005/11 otherwise specified and are according to IEC 61810-1. only to be used together
www.tycoelectronics.com shown for reference purposes Product data, technical para- with the 'Definitions' at Specifications subject to
www.schrackrelays.com only. meters, test conditions and schrackrelays.com in the change.General Purpose Relays
Interface Power Relay RT (Continued)
Coil versions, DC-coil
Coil Rated Operate Release Coil Rated coil
code voltage voltage voltage resistance power
VDC VDC VDC Ohm mW
006 6 4.2 0.6 90+10% 400
012 12 8.4 1.2 360+10% 400
++
024 24 16.8 2.4 1440 10% 400
048 48 33.6 4.8 5520+10% 417
060 60 42.0 6.0 8570+12% 420
110 110 77.0 11.0 28800+12% 420
All figures are given for coil without preenergization, at ambient temperature +23C
Other coil voltages on request
Coil versions, AC-coil 50Hz
Coil Rated Operate Release Coil Rated coil
code voltage voltage voltage resistance power
50 Hz 50 Hz 50 Hz
VAC VAC VAC Ohm VA
++
524 24 18.0 3.6 350 10% 0.76
615 115 86.3 17.3 8100+15% 0.76
++
730 230 172.5 34.5 32500 15% 0.74
All figures are given for coil without preenergization, at ambient temperature +23C
Other coil voltages on request
Insulation
Dielectric strength coil-contact circuit 5000 Vrms
open contact circuit 1000 Vrms
adjacent contact circuits 2500 Vrms
Clearance / creepage coil-contact circuit W 10 / 10 mm
Material group of insulation parts W IIIa
Tracking index of relay base PTI 250 V
Insulation to IEC 60664-1
Type of insulation coil-contact circuit reinforced
open contact circuit functional
adjacent contact circuits basic Terminal assignment
Bottom view on pins
Rated insulation voltage 250 V
Pollution degree 3
Rated voltage system 240/400 V 1 CO contact 12 A
Overvoltage category III
Other data 1-pole 2-pole S0163-BC
RoHS - Directive 2002/95/EC compliant as per product date code 0413
Flammability class according to UL94 V-0
Ambient temperature range DC coil -40...+85C 1 CO contact 16 A
AC coil -40...+70C
Operate- / release time DC coil typ 7 / 3 ms typ 7 / 2 ms
Bounce time DC coil, NO / NC contact typ 1 / 3 ms typ 1 / 3 ms
S0163-BE
Vibration resistance (function), NO / NC contact 20 / 5 g, 30 ... 500 Hz
Shock resistance (destruction) 100 g
Category of protection RTII
Mounting distance 0 mm, dense packing 2 CO contacts 8 A
Relay weight 14 g
Packaging unit 20 / 500 pcs
S0163-BJ
Accessories
For Details see datasheet Accessories Interface Power Relay RT
Dimensions
Relay Packages
Complete packages consisting of a relay mounted on a socket see Package RT
S0272-BA
2
Datasheet Rev. EK1 Dimensions are in mm unless Product specification processing information Schrack section.
Issued 2005/11 otherwise specified and are according to IEC 61810-1. only to be used together
www.tycoelectronics.com shown for reference purposes Product data, technical para- with the 'Definitions' at Specifications subject to
www.schrackrelays.com only. meters, test conditions and schrackrelays.com in the change.