1415898-1 TE Connectivity

General Purpose Low Power PCB Relays SCHRACK Power PCB Relay RT1 Inrush Power n 1 pole 16A, 1 form A (NO) contact (W pre-make contact + AgSnO ) 2 n 165A/20ms inrush peak current n Mono- or bistable coil n 5kV/10mm coil-contact n Reinforced insulation n Test tab (manual operator) optional n WG version: product in accordance to IEC60335-1 Typical applications Lighting systems, movement sensors, filament and incandescent lamp loads, motors. Zb Approvals Contact Data (continued) Mechanical endurance VDE Cert. No. 40007571,UL E214025, cCSAus 1142018 6 6 DC coil >5x10 ops. >10x10 ops. Technical data of approved types on request. 6 6 bistable version >3x10 ops. >5x10 ops. 3 tab manually operated >1x10 ops. - Contact Data RT.3T RTS3L Contact arrangement 1 form A (NO) contact Coil Data, monostable DC coil Rated voltage 250VAC Coil voltage range 5 to 110VDC Max. switching voltage 400VAC Operative range, IEC 61810 2 Rated current 16A Coil insulation system according UL1446 class F Limiting continuous current 16A, UL: 20A (RTS3L) Limiting making current, Coil versions, monostable DC coil max. 20ms (incand. lamps) 165A 120A Coil Rated Operate Release Coil Rated coil Breaking capacity max. 4000VA code voltage voltage voltage resistance power Contact material W (pre-make cont.) AgSnO 2 1) VDC VDC VDC 10% mW +AgSnO 2 005 5 3.5 0.5 62 403 Contact style pre-make contact single contact 006 6 4.2 0.6 90 400 -1 Frequency of operation, with/without load 360/3600h 009 9 6.3 0.9 203 400 Operate/release time max., DC coil 10/5ms 012 12 8.4 1.2 360 400 Operate/Reset time max., bistable version 10/10ms 024 24 16.8 2.4 1440 400 Bounce time max. 4ms 048 48 33.6 4.8 5520 417 1) 060 60 42.0 6.0 8570 420 Contact ratings 1) 110 110 77.0 11.0 28800 420 Type Contact Load Cycles 1) Coil resistance 12%. IEC 61810 All figures are given for coil without pre-energization, at ambient temperature +23C. 3 RTS3L A (NO) 20A, 250VAC resistive, 70C 20x10 Other coil voltages on request. 3 RTS3L monostable A (NO) 16A, 250VAC resistive, 85C 100x10 3 RTS3T A (NO) 16A, 250VAC resistive, 85C 5x10 UL 508 3 RTS3L A (NO) 20A, 250VAC, general purpose, 70C 20x10 3 RTS3L A (NO) 16A, 250VAC, resistive, 85C 50x10 3 RTS3L A (NO) TV8, 240VAC, 40C 25x10 3 RTS3L A (NO) 1.5hp, 240VAC, 70C 30x10 RTS3T A (NO) 1200W Tungsten, 120VAC/277VAC, 3 60Hz, 50C 6x10 RTS3T A (NO) 620W Discharge lamps (standard ballast), 3 120VAC/277VAC, 60Hz, 50C 6x10 Coil Data, bistable coils 1 coil 2 coils Magnetic system polarized, bistable Coil voltage range 3 to 24VDC Operative range, IEC 61810 2 Limiting voltage, % of rated coil voltage 120% 150% Min./Max. energization duration 30ms/1min at <10% duty factor Coil insulation system according UL1446 class F 1 07-2014, Rev. 0714 Catalog and product specification according Catalog and product data is subject to the Catalog product data, Definitions section, www.te.com to IEC 61810-1 and to be used only together terms of the disclaimer and all chapters of application notes and all specifications are 2014 Tyco Electronics Corporation, with the Definitions section. the Definitions section, available at subject to change. a TE Connectivity Ltd. company. General Purpose Low Power PCB Relays SCHRACK Power PCB Relay RT1 Inrush Power (Continued) Coil Data (continued) Other Data RT.3T RTS3L Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content Coil versions, bistable refer to the Product Compliance Support Center at Coil Rated Set Reset Coil Rated coil www.te.com/customersupport/rohssupportcenter code voltage voltage voltage resistance power Ambient temperature VDC VDC VDC 10% mW monostable DC coil -40 to 85C Coil versions, bistable 1 coil bistable 1 coil -10 to 85C A03 3 2.1 1.7 21 429 bistable 2 coils -40 to 85C A12 12 8.4 6.6 360 400 Category of environmental protection A24 24 16.8 13.2 1440 400 IEC 61810 RTII - flux proof Coil versions, bistable 2 coils Vibration resistance (functional), F03 3 2.1 1.7 15 600 monostable version 10g 20g F12 12 8.4 6.6 240 600 Shock resistance (destructive) 100g F24 24 16.8 13.2 886 650 2) All figures are given for coil without pre-energization, at ambient temperature +23C. Terminal type PCB-THT, plug-in Other coil voltages on request. Weight, without / with test tab 14/16g 14g/- Resistance to soldering heat THT Bistable coils - operation IEC 60068-2-20 270C/10s Version 1 coil 2 coils Packaging/unit Coil terminals A1 A2 A1 A3 A2 without test tab tube/20 pcs., tube/20 pcs., Operate + - + - box/500 pcs. box/500 pcs. Reset - + - + with test tab tray/25 pcs., - Contact position not defined at delivery box/100 pcs. - 2) RTT3T or bistable 2 coil version: PCB mounting only. See Accessories. Accessories RTS3. For details see datasheet Accessories Industrial Power Relay R T Socket available for 1 coil version only. NOTE: indicated contact ratings and electrical endurance data for direct wiring of relays (according IEC 61810-1) for relays mounted on sockets deratings may apply. Insulation Data Initial dielectric strength between open contacts 1250V rms between contact and coil 5000V rms Clearance/creepage between contact and coil 10/10mm Material group of insulation parts IIIa Tracking index of relay base PTI 250V 2 07-2014, Rev. 0714 Catalog and product specification according Catalog and product data is subject to the Catalog product data, Definitions section, www.te.com to IEC 61810-1 and to be used only together terms of the disclaimer and all chapters of application notes and all specifications are 2014 Tyco Electronics Corporation, with the Definitions section. the Definitions section, available at subject to change. a TE Connectivity Ltd. company.