Signal Relays AXICOM IM - C Relay 2 n Minimum board-space 60 mm n Slim line 10x6mm (0.39x0.24) and low profile 5.65mm (0.222) n Switching power 60W/62.5VA n Switching voltage 220VDC/250VAC n Switching current 4A n Bifurcated contacts IM C n High mechanical shock resistance Typical applications Telecommunication, access and transmission equipment, optical network terminals, modems, office and business equipment, consumer electronics, measurement and test equipment, industrial control, medical equipment U 108-98001 Rev. M Approvals AXICOMSignalRelays Contact Data (continued) UL 508 File No. E 111441 UL contact rating 30VDC, 2A, 60W, NO only IM Relay Technical data of approved types on request 110VDC, 0.3A, 33W 220VDC, 0.27A, 60W Contact Data standard C 125VAC, 0.5A, 62.5W Contact Data standard high dielectric 250VAC, 0.25A, 62.5W 8 version version Mechanical endurance 10 operations IM-A IM-B IM-C IM-D IM-E Contact arrangementNumber of contacts and type 1 Form C (CO) 1Polebreak 1Polemake 1Pole 2Polebreak 2Polemake changeover Max. switching voltage 220VDC, 250VAC Contact assembly Bifurcatedcontacts Rated current 4A 4A Coil Data Contact material Palladium-ruthenium,gold-covered Limiting continuous current 3A 3A Magnetic system monostable, bistable Limiting continuous current 2A2A 4A2A 2A Switching power 60W, 62.5VA Coil voltage range 1.5 to 24VDC at max. ambient temperature Contact material PdRu Max. coil temperature 125C. Maximum switching current 2A 2A 3A 2A 2A Au covered Thermal resistance <150K/W Maximum swichting voltage 220Vdc 250Vac Contact style twin contacts Maximum switching capacity 60W,62.5VA Min. recommended contact load 100V/1A Coil versions, standard version, monostable, 1 coil Thermoelectric potential <10V Initial contact resistance <50m at 10mA/ 30mV Coil Rated Operate Release Coil Rated coil Minimum switching voltage 100V Thermoelectric potential <10V code voltage set voltage min voltage resistance power Initial contact resistance / < 100 m < 100 m NO < 100 m < 50 m < 50 m Operate time typ. 1ms, max. 3ms VDC VDC VDC 10% mW measuring condition: 10 mA / 20 mV Release time 01 3 2.25 0.30 64 140 Electrical CC0 Contact category 0 endurance ( 30 mV / 10 mA) 6 without diode in parallel typ. 1ms, max. 3ms min.2.5x10operations 02 4.5 3.38 0.45 145 140 cable load open end 6 min.2.0x10operations with diode in parallel typ. 3ms, max. 5ms 03 5 3.75 0.50 178 140 Bounce time max.Resistive load at 125 Vdc / 0.24 A - 30 Wtyp. 1ms, max. 5ms 5 06 12 9.00 1.20 1029 140 min.5x10operations at 220 Vdc / 0.27 A - 60 W 5 min.1x10operations Electrical endurance 07 24 18.00 2.40 2880 140 at 250 Vac / 0.25 A - 62.5 5 min.1x10operations at contact application 0 All figures are given for coil without pre-energization, at ambient temperature +23C VA 5 min.5x10operations 6 at 30 Vdc / 1 A - 30 W 5 min.1x10operations ( 30mV / 10mA) min. 2.5x10 operations at 30 Vdc / 2 A - 60 W 6 cable load open end min. 2.0x10 operations Mechanical endurance 8 typ.10 operations 5 resistive, 125VDC / 0.24A - 30W min. 5x10 operations Coil operating range, standard version UL contact ratings 220 Vdc / 0.24 A - 60 W 5 resistive, 220 VDC / 0.27A - 60W min. 1x10 operations 125 Vdc / 0.24 A - 30 W 5 250 Vac / 0.25 A - 62.5 VA resistive, 250VAC / 0.25A - 62.5VA min. 1x10 operations 125 Vac / 0.5 A - 62.5 VA 5 resistive, 30VDC / 1A - 30W min. 5x10 operations 30 Vdc / 2 A - 60 W 5 resistive, 30VDC / 2A - 60W min. 1x10 operations Max. DC Load Breaking Capacity Max. DC load breaking capacity resistive load DC current A All specications subject to change. Consult Tyco Electronics for latest specications. 21 of 28 1 09-2017, Rev. 0917 Datasheets and product specification Datasheets and product data is subject to the Datasheets, product data, Definitions sec - www.te.com according to IEC 61810-1 and to be used terms of the disclaimer and all chapters of tion, application notes and all specifications 2015 Tyco Electronics Corporation, only together with the Definitions section. the Definitions section, available at are subject to change. a TE Connectivity Ltd. company 108-98001 Rev. M AXICOMSignalRelays 108-98001 Rev. M 108-98001 Rev. M AXICOMSignalRelays AXICOMSignalRelays IM Relay IM-C Relay 1 Pole Changeover / 1 Form C / SPDT IM-C Relay 1 Pole Changeover / 1 Form C / SPDT Coil Operating Range Dimensions IM-C Dimensions IM-C Dimensions in mm Dimensions in mm U = Nominal coil voltage nom 3.4 50mW coil 3.2 U = Upper limit of the operative range of 100mW coil max. 3 THT Version THT Version SMT Version SMT Version Umax. at 2x1A the coil voltage (limiting voltage) when 2.8 Umax. at 0A coils are continously energized 2.6 Standard Version Standard Version Gull Wings Gull Wings 2.4 Umax. at 0A U = Lower limit of the operative range of op. min. 2.2 the coil voltage (rIMTHT eliable operate voltage)IMSMT IMTHT IMSMT 2 Standard GullWings Standard GullWings 1.8 For latching relays Uset min. resp. Umax. at 2x2A mm inch mm inch mm inch mm inch 1.6 10.00.08 6.00.08 10.00.08 6.00.08 10.00.08 6.00.08 10.00.08 Ureset min.6.00.08 1.4 L 10.000.08 0.3930.003 10.000.08 0.3930.003 L 10.000.08 0.3930.003 10.000.08 0.3930.003 1.2 UW 6.000.08= Lower limit of the operative range of0.2360.003W 6.000.086.000.08 0.2360.0030.2360.003 6.000.08 0.2360.003 Unom. nominal coil voltage rel. min. 1 H 5.650.20 0.2220.008 5.650.20 0.2220.008 H 5.650.20 0.2220.008 5.650.20 0.2220.008 the coil voltage (reliable release voltage) 0.8 T 3.2 0.125 N/A N/A Uop min. T 3.2 0.125 N/A N/A 0.4 0.4 0.6 5.080.1 5.080.1 T1 N/A N/A T1 7.500.30N/A 0.2950.011N/A 7.500.30 0.2950.011 3.2 4.4 3.2 4.4 0.4 0.4 7.50.3 T2 5.080.100.4 0.2000.004 5.080.10 0.2000.004 7.50.3 T2 5.080.10 0.2000.004 5.080.10 0.2000.004 Urel. min. 0.2 5.4 3.2 5.080.1 5.4 4.4 3.2 5.080.1 D1 3.200.154.4 0.1260.006 3.200.15 0.1260.006 D1 3.200.15 0.1260.006 3.200.15 0.1260.006 0 Coplanarity 0.1mm 5.4 D2 2.200.155.4 0.0870.006 2.200.15 0.0870.006 Coplanarity 0.1mm D2 2.200.15 0.0870.006 2.200.15 0.0870.006 -50-40 -30-20 -100 10 20 30 40 50 60 70 80 90 100110 120 7.50.3 7.50.3 Tw 0.40 0.015 Tw 0.400.4 0.0150.015 0.4 0.015 Ambient Temperature C S 0.75 0.029 N/A N/A S 0.75 0.029 N/A N/A Coplanarity 0.1mm Coplanarity 0.1mm Mounting Hole Layout Solder Pad Layout Mounting Hole Layout Solder Pad Layout Signal Relays 3.4 AXICOM 3.2 140mW coil View onto the component side of the PCB (top view)View onto the component side of the PCB (top view)View onto the component side of the PCB (top view)View onto the component side of the PCB (top view) 3 200mW coil 2.8 Umax. at 2x1A 2.6 IM - C Relay (Continued) 2.4 Umax. at 0A 2.2 Umax. at 0A 2 1.8 1.6 Umax. at 2x2A 1.4 Coil Data (continued) Vibration resistance (functional) 20g, 10 to 500Hz 1.2 Unom. nominal coil voltage 1 Shock resistance (functional), half sinus 11ms 50g 0.8 Coil versions, bistable 1 coil Shock resistance (destructive), half sinus 0.5ms 500g 0.6 0.4 Coil Rated Set UreResetl. min. Coil Rated coil Weight max. 0.75g 0.2 code 0 voltage voltage Voltage resistance power -50 -40 -30 -20 -10 0102030405060708090 100 110 120 VDC VDC VDC 10% mW Ambient Temperature C 41 3 2.25 -2.25 90 100 Other Data (continued) Resistance to soldering heat THT Peak Value Coil operating range, bistable 1 coil IEC 60068-2-20 265C/10s Resistance to soldering heat SMT 3.4 3.2 IEC 60068-2-58 265C/10s 3 Moisture sensitive level, JEDEC J-Std-020D MSL3 Umax. - 5%coil 2.8 duty at Umax.-5%coil related only to SMT relays 2.6 duty at 0A(100mW) 2x2A (100mW) Umax. - 100% coil duty at 2.4 0A (100mW) packed in orginal dry-packs 2.2 Umax.-5%coil Terminal Assignment Terminal Assignment Ultrasonic cleaning not recommended duty at 0A (200mW) 2 Umax. - 100% coil duty at 1.8 Packaging/unit Relay top view 0A (200mW) Relay top view 1.6 Umax. -5% coil THT version tube/50pcs., box/1000 pcs. duty at 2x1A (100mW) 1.4 Non-Latching Type SMT version reel/1000 pcs., box/1000 or 5000 pcs. 1.2 Non-Latching Type Latching Type, 1 Coil Latching Type, 1 Coil Unom. nominal coil voltage 1 0.8 not energized condition not energized condition reset condition reset condition Terminal assignment Uset min. 0.6 0.4 TOP view on relay 100 mW Latching 0.2 200 mW Latching Monostable version Bistable version, 1 coil 0 reset condition -50-40 -30-20 -100 10 20 30 40 50 60 70 80 90 100 110 120 130 140 Ambient Temperature C All figures are given for coil without pre-energization, at ambient temperature +23C 108-98001 Rev. M 108-98001 Rev. M AXICOMSignalRelays AXICOMSignalRelays InsulationAll specications subject to change. Consult T standaryco Electrd*onics for latest specications. C* 24 of 28 standard high dielectric IM-C Relay 1 Pole Changeover / 1 Form C / SPDT IM-C Relay 1 Pole Changeover / 1 Form C / SPDT version version Initial dielectric strength between open contacts 1000V 1600V rms rms between contact and coil 1800V 2200V rms rms Contacts are shown in reset Dimensions IM-C Dimensions in mm Dimensions IM-C Dimensions in mm between adjacent contacts condition. Contact position might Initial surge withstand voltage change during transportation and must be reset before use. between open contacts 1500V 2200V between contact and coil 2500V 3000V All specications subject to change. Consult Tyco Electronics for latest specications. 14 of 28 All specications subject to change. Consult Tyco Electronics for latest specications. 14 of 28 THT Version SMT Version THT Version SMT Version Initial insulation resistance 108-98001 Rev. M 108-98001 Rev. M AXICOMSignalRelaysAXICOMSignalRelays 9 9 between insulated elements >10 >10 Dimensions IM-C Relay 1 Pole Changeover / 1 Form C / SPDT Capacitance StandardIM-C Rela Version y 1 Pole Changeover / 1 Form C / SPDT Gull Wings Standard Version Gull Wings between open contacts max. 1pF THT version SMT version IMTHT IMSMT between contact and coil max. 2pFIMTHT IMSMT Dimensions IM-C Dimensions in mm Dimensions IM-C Dimensions in mm Standard GullWings between adjacent contacts max. 2pFStandard StandarGullWingsd version Gull wings mm inch mm inch mm inch mm inch *this relay contains SF6 (Sulfur hexafluoride, CAS number: 2551-62-4) for dielectric strength 10.00.08 6.00.08 10.00.08 6.00.08 10.00.08 6.00.08 10.00.08 6.00.08 L 10.000.08 0.3930.003 10.000.08 0.3930.003 enhancement, SF6 is hermetically sealed in r L elay without leaks to air during normal applica10.000.08 0.3930.003THT Version- THT V10.000.08ersion 0.3930.003 SMT VersionSMT Version tion as recommended per the applicable product specification. It is clarified that the usage W 6.000.08 0.2360.003 6.000.08 0.2360.003 W 6.000.08 0.2360.003 6.000.08 0.2360.003 Standard Version Gull Wings Standard Version Gull Wings of SF6 in mini signal relay is not prohibited by related regulations. Please contact TE local H 5.650.20 0.2220.008 5.650.20 0.2220.008 H 5.650.20 0.2220.008 5.650.20 0.2220.008 IMTHT IMSMT sales or field engineer for further information and detailed material declaration. IMTHT IMSMT T 3.2 0.125 N/A N/A T 3.2 0.125 N/A N/A Standard GullWings Standard GullWings 0.4 0.4 5.080.1 5.080.1 mm inchmm T1inchmm N/Ainchmm inch N/A 7.500.30 0.2950.011 T1 N/A N/A 7.500.30 0.2950.011 10.00.08 10.00.08 6.00.08 10.00.08 6.00.0810.00.08 6.00.08 6.00.08 3.2 4.4 3.2 4.4 L 10.000.08 0.3930.003 10.000.08 0.3930.003 L 10.000.08 0.3930.003 10.000.08 0.3930.003 0.4 7.50.3 0.4 T2 5.080.10 7.50.30.2000.004 5.080.10 0.2000.004 T2 5.080.10 0.2000.004 5.080.10 0.2000.004 W 6.000.08 W 0.2360.0036.000.08 0.2360.0036.000.08 0.2360.0036.000.08 0.2360.003 5.4 5.4 3.2 4.4 5.080.1 3.2 4.4 5.080.1 H 5.650.20 H 0.2220.0085.650.20 0.2220.0085.650.20 0.2220.0085.650.20 0.2220.008 D1 3.200.15 0.1260.006 3.200.15 0.1260.006 D1 3.200.15 0.1260.006 3.200.15 0.1260.006 RF Data T 3.2 0.125 N/A N/A T 3.2 0.125 N/A N/A 0.4 Coplanarity 0.1mm 5.4 D2 Coplanarity 0.1mm2.200.15 0.4 0.0870.0065.080.1 2.200.155.080.1 0.0870.006 5.4 D2 2.200.15 0.0870.006 2.200.15 0.0870.006T1 N/A N/A 7.500.30 0.2950.011 T1 N/A N/A 7.500.30 0.2950.011 3.2 4.4 7.50.3 3.2 4.4 Cross talk at 100MHz/900MHz7.50.3 -37.0dB/-18.8dB 0.4 7.50.3 0.4 T2 5.080.10 0.2000.004 5.080.10 0.2000.004 7.50.3 T2 5.080.10 0.2000.004 5.080.10 0.2000.004 Tw 0.40 5.4 0.015 5.4 0.4 0.015 Tw 0.40 0.015 0.43.2 4.4 5.080.1 0.015 3.2 4.4 5.080.1 D1 3.200.15 0.1260.006 3.200.15 0.1260.006 D1 3.200.15 0.1260.006 3.200.15 0.1260.006 Insertion loss at 100MHz/900MHz 0.03dB/0.33dB 5.4 D2 2.200.15 0.0870.006 2.200.15 0.0870.006Coplanarity 0.1mm Coplanarity 0.1mm 5.4 D2 2.200.15 0.0870.006 2.200.15S 0.0870.0060.75 0.029 N/A N/A S 0.75 0.029 N/A 7.50.3 N/A 7.50.3 Tw 0.40 0.015 0.4 0.015 Tw 0.40 0.015 0.4 0.015 Voltage standing wave ratio (VSWR) Coplanarity 0.1mm Coplanarity 0.1mm S 0.75 0.029 N/A N/A S 0.75 0.029 N/A N/A Coplanarity 0.1mm Coplanarity 0.1mm at 100MHz/900MHz 1.06/1.49 PCB layout TOP view on component side of PCB Mounting Hole LaMounting Hole LaMounting Hole Layout yout yout Solder Pad LayoutSolder Pad Layout Solder Pad Layout Mounting Hole Layout Solder Pad Layout View onto the component side of the PCB (top view) View onto the component side of the PCB (top view) View onto the component side of the PCB (top view) View onto the component side of the PCB (top view) Other Data View onto the component side of the PCB (top view) View onto the component side of the PCB (top view) View onto the component side of the PCB (top view) View onto the component side of the PCB (top view) Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content THT mounting holes SMT - solder pads refer to the Product Compliance Support Center at www.te.com/customersupport/rohssupportcenter Ambient temperature -40C to +85C Thermal resistance <150K/W Category of environmental protection IEC 61810 RT V - hermetically sealed Degree of protection IEC 60529 IP 67, immersion cleanable Terminal AssignmentTerminal Assignment 2 Relay top view Relay top view 09-2017, Rev. 0917 Datasheets and product specification Datasheets and product data is subject to the Datasheets, product data, Definitions sec - www.te.com according to IEC 61810-1 and to be used Non-Latching TNon-Latterms of the disclaimer and all chaype ching Type pters of tion, application notes and all specificaLatching Type, 1 Coil tions Latching Type, 1 Coil 2015 Tyco Electronics Corporation, only together with the Definitions section. the Definitions section, available at are subject to change. not energized condition not energized condition reset conditionreset condition a TE Connectivity Ltd. company