MS1471 SPECIFICATIONS PC Board Mountable Pressure Sensor 0-60 mV Output Gage and Absolute Low Cost The MS1471 is a piezoresistive silicon pressure sensor packaged in a surface mount configuration. It is intended for high volume applications where small size, light weight, low cost, and compatibility with automated assembly equipment are required. Offset and span are calibrated at room temperature for OEMs requiring higher accuracies. The pressure sensor is available with a gage or absolute pressure sensing chip that is attached to a surface mountable ceramic substrate. A plastic cap is attached to the ceramic substrate, protecting the chip and providing the pressure port. The devices are shipped in plastic anti-static shipping tubes for use with automated production equipment. The drawing shows a standard tube version. Ports are also available with a narrow hole or a large hole to interface with the pressure media. SENSOR SOLUTIONS ///MS1471 06/2017 Page 1 MS1 4 71 FEATURES Surface Mount Package 0.25% Pressure Non Linearity 3 Pressure Port Options Solid State Reliability Low Power APPLICATIONS Altitude Measurement Barometric Pressure Medical Instrumentation Consumer Appliances STANDARD RANGES Range psia psig 0 to 5 W, N, T 0 to 15 W, N, T W, N, T 0 to 30 W, N, T W, N, T 0 to 50 W, N, T W, N, T 0 to 100 W, N, T W, N, T 0 to 250 W, N 0 to 500 W, N Port Options: W = Wide Hole (Gel Fill option available), N = Narrow Hole, T = Tube SENSOR SOLUTIONS ///MS1471 06/2017 Page 2