SPECIFICATION CONTROL DRAWING Product Revisions Product Dimensions Prepared Cable Dimensions Product A B L D E F G H J Name min min max max min min max 2.50 3.00 24.5 3.00 1.50 1.00 2.50 6.0 0.5 7.0 0.5 CWT-3 D 0.098 0.118 0.965 0.118 0.060 0.040 0.098 0.2360.020 0.7260.020 4.30 4.80 29.3 4.80 2.00 1.50 4.30 8.0 0.5 9.0 0.5 CWT-5 F 0.170 0.189 1.154 0.189 0.079 0.059 0.170 0.3150.020 0.3540.020 6.00 6.70 32.00 6.70 3.30 2.80 6.00 9.0 0.5 10.0 0.5 CWT-6 A 0.236 0.264 1.260 0.264 0.130 0.110 0.236 0.3540.020 0.3940.020 6.80 7.30 32.50 7.30 3.30 2.80 6.80 10.0 1.0 11.0 1.0 CWT-7 F 0.268 0.287 1.280 0.287 0.130 0.110 0.268 0.3940.040 0.4330.040 8.70 9.20 35.50 9.20 4.50 4.00 8.70 11.0 1.0 12.0 1.0 CWT-9 A 0.343 0.362 1.398 0.362 0.177 0.157 0.343 0.4330.040 0.4720.040 10.80 11.50 35.50 11.50 4.50 4.00 10.80 12.0 1.0 13.0 1.0 CWT-11 E 0.425 0.453 1.398 0.453 0.177 0.157 0.425 0.4720.040 0.5120.040 13.00 15.10 45.50 15.10 7.00 6.50 13.00 16.0 1.0 17.0 1.0 CWT-13 A 0.512 0.594 1.791 0.594 0.276 0.256 0.512 0.6300.040 0.6700.040 MATERIALS 1. INSULATION SLEEVE: Heat-shrinkable, radiation cross-linked modified polyolefin. Color: transparent clear. 2. SOLDER PREFORM WITH FLUX: SOLDER: TYPE Cd18 per ANSI/J-STD-006. FLUX: TYPE ROM1 per ANSI/J-STD-004. 3. MELTABLE SEALING RING: Thermally stabilized thermoplastic. Color: blue (size 3, 5, 6, 7, 9, 11) natural (size 13) 4. MELTABLE SEALING RING: Thermally stabilized thermoplastic. Color: blue (size 3, 5, 7, 11) gray (size 6) natural (size 9, 13) APPLICATION 1. These controlled soldering devices are designed for termination of a bare or tin-plated copper shield on a cable having an insulation rated for at least +85C, meeting the dimensional criteria listed in the table above. 2. Temperature range: -55C to +125C. 3. When installed properly, it will meet the requirements of TE Connectivity / Raychem Specification RT-1404. 4. For installation procedure and application equipment consult TE Connectivity / Raychem document RPIP-824-00. For best results, prepare the cable as shown: TITLE: TE Connectivity Soldersleeve Shield Raychem 300 Constitution Drive, Terminator Menlo Park, CA. 94025, U.S.A. DOCUMENT NO.: Unless otherwise specified dimensions are in millimeters. Inches dimensions are shown in brackets CWT-XX TOLERANCES: ANGLES: N/A TE Connectivity reserves the right to amend 0.00 N/A this drawing at any time. Users should evaluate PROD. REV.: DOC. ISSUE: DATE: 0.0 N/A ROUGHNESS IN the suitability of the product for their See Table 4 15-Apr-11 0 N/A MICRON application. PREPARED BY: CAGE CODE : REPLACES: DCR NUMBER: SCALE: SIZE: SHEET: mforonda 06090 D020508 D040057 --- A 1 of 1 Print Date: 9-May-11 2011 Tyco Electronics Corporation, a TE Connectivity Ltd. Company. All Rights Reserved. If this document is printed it becomes uncontrolled. Check with the web for the latest revision. X-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for Solder Sleeves & Shield Tubing category: Click to view products by TE Connectivity manufacturer: Other Similar products are found below : D-260-C-A 899170-000 620040N001 620069N003 620263N004 CTA-0050-01 629624-000 6501390002 CX0781-000 CX0782-000 696396-000 697080-000 715325N001 FLX40-030-02-CS8652 908357N001 CB0213-000 CB0219-000 274384-000 285343-000 970053- 000 ST18-2-00 FLX40-020-04-CS8651 317035-000 325534-000 D-100-00-WOTI D-150-1011 395947-000 427243N001 514535-000 C03534-000 CB0220-000 D44133N001 626168-000 451893-000 931289-000 162583-000 585769N001 610001N004 6200060004 622041N003 626167-000 EG3678-000 650075N002 6500820003 6500850004 650126N010 650127N005 146201-000 7400720001 CA3200N001