Metal Glaze Fixed Resistors
Type RGP Series
Key Features
The thick film is suitable
for the manufacture of
very high resistance
values and for high
voltage working
components.
The combination of high
values and high working
voltage makes these
components ideally
suited for such
applications as TVs,
electrical measuring
equipment etc..
Thick film metal glaze
series for high ohmic
values and high voltage
surge rating with a range
up to 10 Gohm.
Metal glaze resistors are manufactured using thick film techniques. The ceramic slugs
have the thick film applied, the film is fired and end caps are forced onto the slugs, the
resistive element is spiralled to value and lead wires are welded onto the end caps. Four
layers of coating are applied - the first being a phenolic resin, the other three being epoxy.
Characteristics - Electrical
RGP0207CH RGP50 RGP100 RGP200 RGP300 RGP400
Rated Power @ 70C (W): 0.25 0.5 1 2 3 4
Resistance Range (ohms) Min: 1M0 1M0 1M0 1M0 1M0 1M0
Max: 1G0 3G0 5G0 5G0 10G 10G
Tolerance (%): 5 10
Code Letter: J K
Temp. Coefficient Max (ppm/C): 350
Selection Series: E24
Limiting Element Voltage (V): 750 1K0 1K5 5K0 10K 15K
Maximum Overload Voltage (V): 1K0 1K5 2K5 7K5 15K 20K
Operating Temp. Range (C): -55 to +155
Climatic Category: 55/155/56
Voltage Coefficient (%/V): 0.005
Typical Noise at 47Mohm: 0.75
Dielectric Strength (V): 300
Insulation Resistance (Mohms): 1000
Dimensions
Style L 1 D 0.5 d 0.1 l 2
RGP0207CH 6.5 2.5 0.6 28
RGP50 13.0 4.5 0.8 38
RGP100 14.5 5.5 0.8 38
RGP200 27.0 7.0 0.8 38
RGP300 42.0 7.0 0.8 38
RGP400 52.0 8.0 1.0 38
1773267 CIS BI 06/2011 Dimensions are in millimeters Dimensions are shown for For email, phone or live chat, go to: te.com/help
and inches unless otherwise reference purposes only.
specified. Values in brackets Specifications subject
are standard equivalents. to change.Metal Glaze Fixed Resistors
Type RGP Series
Derating Curve
100
80
60
40
20
0
40 60 70 80 100 120 140 160
Ambient Temperature (C)
Mounting
The resistors are suitable for processing on automatic insertion equipment and cutting and bending machines.
Marking
RGP0207CH are marked with a four band colour code in accordance with IEC 62. All others are marked
alpha-numerically with the type, value and tolerance.
Packaging
RGP0207CH resistors are normally supplied taped in 'ammo' boxes of 2000 pieces for the range 1M1 to 100M
and in boxes of 1000 for the range 101M to 1G0. All other case sizes are packed loose in polythene bags in
quantities of 50 pieces per bag. Please consult the Sales Office for tape/boxed product up to 2 watt case size.
Special Requirements
Other values and power ratings are available. Contact the Sales Office for special requirements.
Performance Characteristics
The evaluation of the performance characteristics is carried out with reference to IEC
Specifications QC 400 000 and QC 400 100.
TEST REF Long Term Tests (2% + 0.05 ohm)
4.23 Climatic sequence
4.24 Damp heat, steady state
4.25.1 Endurance at 70C
4.25.3 Endurance at 155C
TEST REF Short Term Tests (1% + 0.05 ohm)
4.13 Overload
4.16 Robustness of terminations
4.18 Resistance to soldering heat
4.19 Rapid change of temperature
4.22 Vibration
How to Order
RGP 0207CH J 100R
Common Part Style Tolerance
Value
0207CH - 0.25W
100 ohm
50 - 0.5W
RGP - Metal Glaze
(100 ohms) 100R
J - 5%
Fixed Resistor
100 - 1W
1K0
(1000 ohms) 1K0
200 - 2W
100K ohm
300 - 3W
(100,000 ohms) 100K
400 - 4W
TE Connectivity, TE connectivity (logo) and TE (logo) are trademarks.
Other logos, product and Company names mentioned herein may be trademarks of their respective owners.
While TE has made every reasonable effort to ensure the accuracy of the information in this datasheet, TE does not guarantee that it is error-free, nor does TE make any other
representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves the right to make any adjustments to the information contained herein
at any time without notice. TE expressly disclaims all implied warranties regarding the information contained herein, including, but not limited to, any implied warranties of merchantabili-
ty or fitness for a particular purpose. The dimensions in this datasheet are for reference purposes only and are subject to change without notice. Specifications are subject to change
without notice. Consult TE for the latest dimensions and design specifications.
Percent Rated Power