1623957-2 TE Connectivity

Axial Leaded Power Inductors Type SC10, SC15, SC30, SC55 Series Key Features  Wide Inductance Range  Insulated Packaging  Four Sizes  Flame Retardant  Wide Temperature Range  Established Reliability  Fully Protected from the Environment  Available from Distribution TE Connectivity quality and reliability are guaranteed in this range of insulated and shielded RF Inductors. The insulated range has a self-extinguishing polyolefin sleeve. Their small size make them ideal for use when space is at a premium. And they are also fully protected from environmental factors. Electrostatic and electromagnetic screening is provided by the magnetic enclosure. A wide range of values are available and the self extinguishing polyolefin sleeve enhances environmental protection. The SC series was originally designed for military applications but now has widespread industrial use. Characteristics - Electrical SC10 SC15 SC30 SC55 Inductance Range: See Table - E12 Grid (Non-standard values available to special order) Selection Tolerance: 10% 10% 10% 10% Power Rating at 70C: 0.33W See Below 0.25W 0.30W Isolation Voltage: 700V DC or AC peak Limits of Inductance Change: 5% after 1000 hours endurance Operating Temperature Range: -55C to +100C -55C to +100C -55C to +100C -55C to +125C Recommended Storage Temperature: 0C to +35C Climatic Category: 55/100/21 55/100/21 55/100/21 55/125/21 SC15 Power Rating Values between 0.15uH and 4.7uH - Power Rating 0.33 Watt Values between 5.6uH and 330uH - Power Rating 0.20 Watt Packaging and Marking Type Ammo Pack Reeled Weight per Component Marking SC10 500 Pieces 1500 Pieces LC10 SC15 500 Pieces 1500 Pieces LC15 SC30 500 Pieces 2500 Pieces LC30 SC55 500 Pieces 1500 Pieces 0.6g LC55 Dimensions Size L Max. D Max. l Min. d SC10 10.0mm 4.2mm 25mm 0.6mm SC15 10.0mm 4.5mm 30mm 0.6mm SC30 7.0mm 2.8mm 25mm 0.5mm SC55 11.4mm 5.2mm 30mm 0.6mm 1773282 CIS BI 03/2012 Dimensions are in millimeters Dimensions are shown for For email, phone or live chat, go to: te.com/help and inches unless otherwise reference purposes only. specified. Values in brackets Specifications subject are standard equivalents. to change.Axial Leaded Power Inductors Type SC10, SC15, SC30, SC55 Series Characteristics - Electrical - Type SC10 - Section 1 Max. DC Direct Current Inductance Inductance Test Freq. Q Factor S.R.F. Resistance at 70C Value - H Code MHz Min. MHz Min. Ohms at 20C Max. mA 0.10 R10 25 50 500 0.055 2060 0.12 R12 25 50 475 0.060 1970 0.15 R15 25 50 450 0.065 1900 0.18 R18 25 50 425 0.070 1830 0.22 R22 25 50 400 0.075 1770 0.27 R27 25 50 380 0.085 1660 0.33 R33 25 50 360 0.095 1570 0.39 R39 25 50 330 0.11 1460 0.47 R47 25 50 300 0.12 1390 0.56 R56 25 50 280 0.14 1290 0.68 R68 25 45 260 0.16 1210 0.82 R82 25 45 235 0.26 950 1.0 1R0 25 45 210 0.30 880 1.2 1R2 7.9 32 190 0.50 685 1.5 1R5 7.9 32 170 0.60 625 1.8 1R8 7.9 32 156 0.75 560 2.2 2R2 7.9 32 140 1.10 460 2.7 2R7 7.9 32 125 1.40 410 3.3 3R3 7.9 32 115 1.90 350 Type SC10 - Section 2 Max. DC Direct Current Inductance Inductance Test Freq. Q Factor S.R.F. Resistance at 70C Value - H Code MHz Min. MHz Min. Ohms at 20C Max. mA 3.9 3R9 7.9 45 75 0.25 970 4.7 4R7 7.9 45 65 0.35 820 5.6 5R6 7.9 45 60 0.40 765 6.8 6R8 7.9 45 55 0.55 650 8.2 8R2 7.9 45 50 0.75 560 10 100 7.9 45 45 0.9 510 12 120 2.5 55 40 1.1 460 15 150 2.5 55 35 1.5 395 18 180 2.5 55 30 2.7 295 22 220 2.5 55 27 3.0 280 27 270 2.5 55 25 4.5 230 33 330 2.5 55 22 5.2 210 39 390 2.5 55 20 7.5 175 47 470 2.5 55 18 9.6 156 Type SC10 - Section 3 Max. DC Direct Current Inductance Inductance Test Freq. Q Factor S.R.F. Resistance at 70C Value - H Code MHz Min. MHz Min. Ohms at 20C Max. mA 56 560 2.5 55 11 8.1 170 68 680 2.5 55 10 9.0 161 82 820 2.5 50 8.5 10.0 153 100 101 2.5 50 7.0 11.0 146 120 121 0.79 40 6.5 12.0 140 150 151 0.79 40 5.5 13.0 134 180 181 0.79 45 5.0 15.0 125 220 221 0.79 45 4.2 17.0 117 270 271 0.79 45 3.8 19.5 110 330 331 0.79 45 3.3 22.0 103 390 391 0.79 45 3.1 24.5 98 470 471 0.79 45 2.9 26.5 94 560 561 0.79 45 2.7 30.0 88 680 681 0.79 45 2.5 33.0 84 820 821 0.79 45 2.3 36.5 80 1000 102 0.79 40 2.2 40.0 76 Section 1 was formerly the TE Connectivity C10 Series, Section 2 was formerly the TE Connectivity C11 Series, Section 3 was formerly the TE Connectivity C12 Series 1773282 CIS BI 03/2012 Dimensions are in millimeters Dimensions are shown for For email, phone or live chat, go to: te.com/help and inches unless otherwise reference purposes only. specified. Values in brackets Specifications subject are standard equivalents. to change.