17-015A TE Connectivity

17 47 17 AND 47 UltraStable SPECIFICATIONS PC Board Mountable Pressure Sensor 0-100 mV Output Current Excitation Gage and Absolute Temperature Compensated FEATURES The 17 and 47 UltraStable are high performance, TO-8 Package temperature compensated, piezoresistive silicon pressure -20C to +85C Compensated sensors packaged in a TO-8 configuration. It uses Measurement Temperature Range Specialties proprietary UltraStable die to provide excellent 0.1% Non-Linearity performance and long-term stability over wide temperatures. 1.0% Interchangeable Span Gage and absolute pressure ranges from 0-15 to 0-250 (provided by gain set resistor) psi are available. Integral temperature compensation is provided Solid State Reliability over a range of -20C to +85C using laser-trimmed resistors. An additional laser-trimmed resistor is included to normalize pressure sensitivity variations by programming the gain of an APPLICATIONS external differential amplifier. This provides sensitivity Medical Instruments interchangeability of 1%. Please refer to 13 and 43 for information on products with Process Control Factory Automation operating pressures less than 0-15 psi. Altitude Measurement Vacuum Measurement Handheld Calibrators SENSOR SOLUTIONS ///17 and 47 09/2017 Page 1 17 AND 47 UltraStable STANDARD RANGES Range psig psia 0 to 15 0 to 30 0 to 50 0 to 100 0 to 250 PERFORMANCE SPECIFICATIONS Supply Current: 1.5 mA Ambient Temperature: 25C (unless otherwise specified) PARAMETERS MIN TYP MAX UNITS NOTES Span 75 100 150 mV 1 Zero Pressure Output -2 2 mV Pressure Non Linearity -0.1 0.05 0.1 %Span 2 Pressure Hysteresis -0.1 0.01 0.1 %Span Input Resistance 2200 4000 5800 Output Resistance 4200 Temperature Error Span -0.5 0.3 0.5 %Span 3 Temperature Error Zero -0.5 0.1 0.5 %Span 3 Temperature Coefficient Resistance 0.15 %/C 3 Thermal Hysteresis Zero 0.05 %Span 3 Short Term Stability (Offset & Span) 0.05 %Span 4 Long Term Stability (Offset & Span) 0.1 %Span 5 Supply Current 0.5 1.5 2.0 mA Response Time (10% to 90%) 1.0 ms 6 Output Noise (10Hz to 1kHz) 1.0 V p-p Pressure Overload 3X Rated 7 Compensated Temperature -20 +85 C Operating Temperature -40 +125 C Storage Temperature -50 +150 C Weight 3 grams Solder Temperature 250C Max 5 Sec. Media Non-Corrosive Dry Gases Compatible with Silicon, Pyrex, RTV, Gold, Nickel, and Aluminum Notes 1. Ratiometric to supply current. For 250 psi devices, the minimum span value is 62 mV. 2. Best fit straight line. 3. Maximum temperature error between -20C and +85C with respect to 25C. 4. Short term stability over 7 days with constant current and temperature. 5. Long term stability over a one year period with constant current and temperature. 6. For a zero-to-full scale pressure step change. 7. 2X maximum for 250 psi device. SENSOR SOLUTIONS ///17 and 47 09/2017 Page 2