1SNK516020R0000 TE Connectivity

Technical Datasheet Catalogue Page 1SNK 161 019 D0201 1SNK 161 019 S0201 ZS35 Screw Clamp Terminal Block 35 mm 0 AWG Feed-through 16 mm 0.630 in Spacing Features and Benefits 59 2.32 Closed terminal block: - No end section needed, - Optimized rigidity. 34 1.34 3D CAD outline drawings available onControl Product 3 portal (ing) Ordering Details Type Order Code EAN Code Pack Weight g (1 pce) Grey ZS35 1SNK 516 010 R0000 3472595160105 20 53.40 Blue ZS35-BL 1SNK 516 020 R0000 3472595160204 20 53.40 Orange ZS35-OR 1SNK 516 030 R0000 3472595160303 20 53.40 Declarations and Certificates Document Part Number UE Directive 1SND 225 081 C1006 CE Third Party Certificate 1SND 161 028 A0200 CB RoHS 1SND 230 491 F0203 RoHS Atex Declaration 1SND 225 085 C1003 1 63.3 2.49 55.8 2.19 General Information The following information must be strictly adhered to in order to guarantee the terminal block electrical, mechanical and environmental performance. Protection IP 20 NEMA 1 Rail DIN3-TH35 Wire stripping length 17 mm 0.669 in Screw clamp Screw rail contact (Maximum value) Flat screwdriver Operating tool 6.5 mm 0.256 in 2.9 Nm 25.7 lb.in Torque 0.1 Nm 0.885 lb.in 0.1 Nm 0.885 lb.in Mechanical endurance of disconnect system Material Specifications Insulating material Polyamide IRC 600 V Flammability UL94 V0 NF F 16 101 I2F2 Needle flame test IEC 60695-11-5 Compliant Connecting capacity per clamp 1 Rigid conductor 6-35 mm 10-0 AWG 1 Flexible conductor without ferrule 6-35 mm 10-0 AWG 1 Flexible conductor with ferrule Ferrule maximum outer diameter 14 mm 0.551 in Multi Connecting capacity per clamp 2 Rigid conductors 16 mm 4 AWG 2 Flexible conductors without ferrule 10 mm 6 AWG 2 Flexible conductors with twin ferrule Don t mix solid and flexible conductors in the same clamp Don t mix solid or flexible conductors of different sizes in the same clamp TheConnecting capacity with ferrule data is guaranteed with ABB crimping tool PS-3 Cross section Rated cross section 35 mm 0 AWG Maximum Cross section Manufacturer data 35 mm Manufacturer data 0 AWG Gauge A9-B9 / 10 mm / 0.394 in / IEC 60947-7-1 Electrical characteristics Current Rated current IEC 60947-7-1 125 A Field and factory wiring Cat.2 UL 1059 150 A Factory wiring Cat.1 UL 1059 150 A CSA-C-22.2 n 158 150 A Rated short-time withstand current 1 s (Icw) 4200 A Short-time withstand current 0.5 s Manufacturer data 5 s Manufacturer data 10 s Manufacturer data 30 s Manufacturer data 1 mn Manufacturer data Rated short circuit withstand CSA-C-22.2 n 158 Max. current (45 temperature increase) / Max. cross section (mm) Manufacturer data 125 A 35 mm Maximum short circuit current (1s) Manufacturer data 4200 A 2