SPECIFICATION CONTROL DRAWING 2019D0301
2
10-2-14
120 OHM, 0.75 mm , 19 STRANDS OF 0.23 mm, Date:
TWINAXIAL CABLE, J1939-11 COMPLIANT
CHEMINAX
D
Revision:
THIS SPECIFICATION SHEET FORMS A PART OF THE LATEST ISSUE OF RAYCHEM SPECIFICATION 1200.
CONSTRUCTION DETAILS ELECTRICAL CHARACTERISTICS
DIMENSIONS ARE NOMINAL VALUES IN INCHES, UNLESS
CHARACTERISTIC IMPEDANCE 120 12 ohms, Method D at 1 MHz
OTHERWISE DESIGNATED.
with shield grounded
MUTUAL CAPACITANCE 10.5 pF/ft. (nominal) at 1 MHz
VELOCITY OF PROPAGATION 74% (nominal)
CONDUCTORS
2
0.75 mm ,
SURFACE TRANSFER IMPEDANCE 225 milliohms/meter (maximum)
.0415
19 Strands of 0.23 mm,
(per MIL-DTL-85485) at 0.1 to 1 MHz
Tin-Coated Copper
.125 ADDITIONAL REQUIREMENTS
DIELECTRICS
.003
Rayfoam FS
ELECTRICAL
Colors - Yellow/Green
.115 CONDUCTOR RESISTANCE 7.53 ohms/1000 ft. (nominal)
FILLERS
(prior to cabling)
Polyolefin
INSULATION RESISTANCE 10,000 megohms (minimum) for 1000 ft.
JACKET FLAWS
SPARK TEST 1.0 kV (rms)
DRAINWIRE
2
IMPULSE TEST 6.0 kV (peak)
0.75 mm ,
.0415
19 Strands of 0.23 mm,
VOLTAGE WITHSTAND (DIELECTRIC) 1500 volts (rms)
Tin-Coated Copper
ENVIRONMENTAL
WRAP
.328
FLAMMABILITY Method C
Aluminum-PET-
Aluminum
HEAT SHOCK 225C
LOW TEMPERATURE-COLD BEND -55C/11.0 inch mandrel
VOLTAGE WITHSTAND 1000 volts (rms), 1 minute
(Post Environmental)
PHYSICAL
INSULATION (DIELECTRIC)
.388 ELONGATION 100% (minimum)
2
(nominal) JACKET
TENSILE STRENGTH 1000 lbf/in (minimum)
Thermorad F
.433
JACKET
(maximum)
ELONGATION 200% (minimum)
2
TENSILE STRENGTH 2000 lbf/in (minimum)
JACKET THICKNESS .025 inch (minimum),
.030 inch (nominal),
.040 inch (maximum)
WRAP .003 inch thick (nominal),
10% overlap (minimum)
CABLE IDENTIFICATION: Outer jacket shall be marked in white ink at 12 inch
2
(nominal) intervals as follows: RAYCHEM J1939-11 0.75 mm
Designate outer jacket color with a dash number in accordance
with MIL-STD-681. Unless otherwise specified, outer jacket color
WEIGHT 54.1 lbs/1000 ft. (nominal)
will be black designated by a-0" appended to the part number,
(e.g. 2019D0301-0).
ENGINEERING REFERENCE
Other codes and suffixes may be added to the part number, as
necessary, to capture any additional requirements imposed by TEMPERATURE RATING 125C (maximum)
the purchase order.
Users should evaluate the suitability of this product for their application. Specifications are subject to change without notice. Tyco Electronics Corporation also
reserves the right to make changes in materials or processing, which do not affect compliance with any specification, without notification to Buyer.
Page 1 of 1 Rayfoam, Thermorad, Cheminax, Raychem, TE Connectivity, TE connectivity (logo), and TE (logo) are trademarks.
Raychem Wire & Cable THIS SPECIFICATION SHEET TAKES PRECEDENCE OVER DOCUMENTS REFERENCED HEREIN.
501 Oakside Avenue REFERENCED DOCUMENTS SHALL BE OF THE ISSUE IN EFFECT ON DATE OF INVITATION FOR BID.
Redwood City, California 94063-3800
2005-2014 Tyco Electronics Corporation. All rights reserved.
Phone: 1-800-227-8816 Fax: 1-650-361-6297