202D142-3/42-0 TE Part 814589N002 TE Internal : 202D142-3/42-0 202D142-3/42-0 ACTIVE Raychem TE Part 814589N002 TE Internal : 202D142-3/42-0 View on TE.com> Harnessing > Heat Shrink Components > Heat Shrink Boots Molded Part Shape: Straight Molded Part Shape Code: 202 Lipped: Yes Material Code: 3 Material Systems Code: 10 Features Product Type Features Molded Part Shape Straight Configuration Features Lipped Yes Body Features Material Code 3 Material Systems Code 10 Adhesive Pre-Coat Yes Material Semi-Rigid Modified Polyolefin Dimensions Wire/Cable Outside Diameter .31 in, 8 mm Connector or Backshell Outside Diameter .787 in, 20 mm Usage Conditions Operating Temperature Range -55 135 C -67 275 F Operation/Application Power Cable Accessory No Industry Standards Approved Standards BS-G-198-5-DA Other Molded Part Shape Code 202 09/01/2019 08:11AM Page1 For support call+1 800 522 6752 202D142-3/42-0 TE Part 814589N002 TE Internal : 202D142-3/42-0 Molded Part Shape Code 202 Fluid/Chemical Resistance Occasional exposure to fluids Adhesive Type General Purpose Pre-Coat Adhesive Product Compliance For compliance documentation, visit the product page on TE.com> EU RoHS Directive 2011/65/EU Compliant EU ELV Directive 2000/53/EC Compliant China RoHS 2 Directive MIIT Order No 32, 2016 No Restricted Materials Above Threshold EU REACH Regulation (EC) No. 1907/2006 Current ECHA Candidate List: JAN 2019 (197) Candidate List Declared Against: JAN 2019 (197) Halogen Content Not Low Halogen - contains Br or Cl > 900 ppm. Solder Process Capability Not applicable for solder process capability Product Compliance Disclaimer This information is provided based on reasonable inquiry of our suppliers and represents our current actual knowledge based on the information they provided. This information is subject to change. The part numbers that TE has identified as EU RoHS compliant have a maximum concentration of 0.1% by weight in homogenous materials for lead, hexavalent chromium, mercury, PBB, PBDE, DBP, BBP, DEHP, DIBP, and 0.01% for cadmium, or qualify for an exemption to these limits as defined in the Annexes of Directive 2011/65/EU (RoHS2). Finished electrical and electronic equipment products will be CE marked as required by Directive 2011/65/EU. Components may not be CE marked.Additionally, the part numbers that TE has identified as EU ELV compliant have a maximum concentration of 0.1% by weight in homogenous materials for lead, hexavalent chromium, and mercury, and 0.01% for cadmium, or qualify for an exemption to these limits as defined in the Annexes of Directive 2000/53/EC (ELV). Regarding the REACH Regulations, TEs information on SVHC in articles for this part number is still based on the European Chemical Agency (ECHA) Guidance on requirements for substances in articles(Version: 2, April 2011), applying the 0.1% weight on weight concentration threshold at the finished product level. TE is aware of the European Court of Justice ruling of September 10th, 2015 also known as O5A (Once An Article Always An Article) stating that, in case of complex object, the threshold for a SVHC must be applied to both the product as a whole and simultaneously to each of the articles forming part of its composition. TE has evaluated this ruling based on the new ECHA Guidance on requirements for substances in articles (June 2017, version 4.0) and will be updating its statements accordingly. Compatible Parts TE Part CJ2087-000 HL2010E-KIT-120V 09/01/2019 08:11AM Page2 Customers Also Bought For support call+1 800 522 6752