General Purpose
RT-iPower
SCHRACK
Power PCB Relay RT Inrush Power
n
1 pole 16A, 1 form A (NO) contact (AgSnO2 or W pre-make contact +
AgSnO2)
n
Mono- or bistable coil
n
5kV/10mm coil-contact
n
Reinforced insulation
n
Test tab (manual operator) optional for RTT3T bistable versions
n
WG version: product in accordance to IEC60335-1
n
RTS3T: Electronic ballast UL508/NEMA 410 rated
n
RTSET: 8A Electronic ballast rated
Typical applications
LED lighting systems, filament and incandescent lamp loads, movement
detectors, light sensors, intelligent wall sockets, motors (RTS3L), bus
system actuators.
Zb
Approvals
VDE Cert. No. 40007571,UL E214025, cCSAus 1142018
Technical data of approved types on request.
Contact Data RT.3T / RTSET RTS3L
Contact arrangement 1 form A (NO) contact
Rated voltage 250VAC
Max. switching voltage 480VAC
Rated current 16A
Limiting continuous current 16A 20A
Limiting making current,
max. 20ms (incand. lamps) 165A peak 120A peak
max. 200s 800A peak
Breaking capacity max. 4000VA
Contact Data (continued),
Contact material W (pre-make cont.) AgSnO
2
+AgSnO Mechanical endurance RT.3T / RTSET RTS3L
2
6 6
Contact style pre-make contact single contact DC coil >5x10 ops. >10x10 ops.
6 6 6
-1
Frequency of operation, with/without load 360/3600h bistable version >3x10 / >1x10 ops. >5x10 ops.
3
Operate/release time max., DC coil 10/5ms tab manually operated >1x10 ops. -
Operate/Reset time max., bistable version 10/10ms
Bounce time max. 4ms
Coil Data, monostable DC coil RT.3T RTSET RTS3L
Contact ratings
Coil voltage range 5 to 110VDC
Type Contact Load Cycles
Operative range, IEC 61810 2
IEC 61810
Coil insulation system according UL1446 class F
3
RTS3L A (NO) 20A, 250VAC resistive, 70C 20x10
3
RTS3L monostable A (NO) 16A, 250VAC resistive, 85C 100x10
Coil versions, monostable DC coil
3
RTS3T A (NO) 16A, 250VAC resistive, 85C 5x10
Coil Rated Operate Release Coil Rated coil
In process:
code voltage voltage voltage resistance power
Type Contact Load Cycles
1)
VDC VDC VDC 10% mW
3
RTSET A (NO) 16A, 250VAC resistive, 85C 5x10
005 5 3.5 0.5 62 403
UL 508
006 6 4.2 0.6 90 400
3
RTS3L A (NO) 20A, 250VAC, general purpose, 70C 20x10
009 9 6.3 0.9 203 400
3
RTS3L A (NO) 16A, 250VAC, resistive, 85C 50x10
012 12 8.4 1.2 360 400
3
RTS3L A (NO) TV8, 240VAC, 40C 25x10
024 24 16.8 2.4 1440 400
3
RTS3L A (NO) 1.5hp, 240VAC, 70C 30x10
048 48 33.6 4.8 5520 417
RTS3T A (NO) 1200W Tungsten, 120VAC/277VAC,
1)
060 60 42.0 6.0 8570 420
3
60Hz, 50C 6x10
1)
110 110 77.0 11.0 28800 420
*
3
RTS3T A (NO) 2A, 480VAC, magnetic ballast, 80C 10x10
1) Coil resistance 12%.
*
3
RTS3T A (NO) 2A, 480VAC, electronic ballast, 80C 10x10
All figures are given for coil without pre-energization, at ambient temperature +23C.
3
RTS3T A (NO) 3A, 277VAC, electronic ballast, 80C 15x10
Other coil voltages on request.
3
RTS3T A (NO) 5A, 120VAC, electronic ballast, 80C 15x10
3
RTS3T A (NO) 5A, 277VAC, electronic ballast, 85C 10x10
RTS3T A (NO) 5A, 347VAC, electronic ballast, 105C
*
3
with z.c 10x10
3
RTS3T A (NO) 5A, 347VAC, magnetic ballast, 105C 10x10
*
3
RTS3T A (NO) 3A, 480VAC, magnetic ballast, 105C 10x10
3
RTSET A (NO) 16A, 250VAC, general purpose, 85C 5x10
RTSET A (NO) 8A, 277VAC, electronic ballast, 85C 6x10
3
RTSET A (NO) 5A, 277VAC, electronic ballast, 85C 10x10
3
RTSET A (NO) 3A, 277VAC, electronic ballast, 85C 20x10
3
RTSET A (NO) 5A, 120VAC, electronic ballast, 85C 20x10
* Special test conditions available on request
1
01-2019, Rev. 0119 Catalog and product specification according Catalog and product data is subject to the Catalog product data, Definitions section,
www.te.com to IEC 61810-1 and to be used only together terms of the disclaimer and all chapters of application notes and all specifications are
2014 Tyco Electronics Corporation, with the Definitions section. the Definitions section, available at subject to change.
a TE Connectivity Ltd. company. General Purpose
RT-iPower
SCHRACK
Power PCB Relay RT Inrush Power (Continued)
Coil Data (continued),
bistable coils 1 coil 2 coils
Magnetic system polarized, bistable
Coil voltage range 3 to 24VDC
Operative range, IEC 61810 2
Limiting voltage, % of rated coil voltage 120% 150%
Min./Max. energization duration 30ms/1min at <10% duty factor
Coil insulation system according UL1446 class F
Coil Data RT.3T RTS3L
Coil versions, bistable
Coil Rated Set Reset Coil Rated coil
code voltage voltage voltage resistance power
VDC VDC VDC 10% mW
Coil versions, bistable 1 coil
A03 3 2.1 1.7 21 429
A12 12 8.4 6.6 360 400
Insulation Data
A24 24 16.8 13.2 1440 400
Initial dielectric strength
Coil versions, bistable 2 coils
between open contacts 1250V
F03 3 2.1 1.7 15 600
rms
between contact and coil 5000V
F12 12 8.4 6.6 240 600
rms
Clearance/creepage
F24 24 16.8 13.2 886 650
All figures are given for coil without pre-energization, at ambient temperature +23C. between contact and coil 10/10mm
Other coil voltages on request. Material group of insulation parts IIIa
Tracking index of relay base PTI 250V
Coil Data RTSET Other Data
Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content
Coil versions, bistable
refer to the Product Compliance Support Center at
Coil Rated Set Reset Coil Rated coil
www.te.com/customersupport/rohssupportcenter
code voltage voltage voltage resistance power
Ambient temperature RT.3T / RTS3L
VDC VDC VDC 10% mW
monostable DC coil -40 to 105C
Coil versions, bistable 1 coil
bistable 1 coil -10 to 105C
A03 3 2.1 1.8 21 429
bistable 2 coils -40 to 105C
A12 12 8.4 7.2 360 400
Ambient temperature RTSET
A24 24 16.8 14.4 1440 400
monostable DC coil -40 to 85C
Coil versions, bistable 2 coils
bistable 1 coil -10 to 85C
F03 3 2.1 1.8 15 600
F12 12 8.4 7.2 240 600 bistable 2 coils -40 to 85C
F24 24 16.8 14.4 886 650
All figures are given for coil without pre-energization, at ambient temperature +23C.
Other coil voltages on request.
RT.3T / RTSET RTS3L
Category of environmental protection
Bistable coils - operation
IEC 61810 RTII - flux proof
Version 1 coil 2 coils
RTIII - wash tight available upon request
Coil terminals A1 A2 A1 A3 A2
Vibration resistance (functional), 10g 20g
Operate + - + -
monostable version
Reset - + - +
Shock resistance (destructive) 100g
Contact position not defined at delivery 2)
Terminal type PCB-THT, plug-in
Weight, without / with test tab 14/16g 14g/-
Resistance to soldering heat THT
IEC 60068-2-20 270C/10s
RT.3T / RTSET RTS3L
Packaging/unit
without test tab tube/20 pcs., tube/20 pcs.,
box/500 pcs. box/500 pcs.
with test tab tray/25 pcs., -
box/100 pcs. -
2) RTT3T or bistable 2 coil version: PCB mounting only. See Accessories.
Accessories RTS.
For details see datasheet Accessories Industrial Power Relay R T
Socket available for 1 coil version only.
NOTE: indicated contact ratings and electrical endurance data for direct
wiring of relays (according IEC 61810-1); for relays mounted on sockets
deratings may apply.
2
01-2019, Rev. 0119 Catalog and product specification according Catalog and product data is subject to the Catalog product data, Definitions section,
www.te.com to IEC 61810-1 and to be used only together terms of the disclaimer and all chapters of application notes and all specifications are
2014 Tyco Electronics Corporation, with the Definitions section. the Definitions section, available at subject to change.
a TE Connectivity Ltd. company.