MICRO SFP+ CONNECTOR & CABLE ASSEMBLY micro SFP+ Connector and Cable Assembly TE Connectivitys (TE) micro SFP+ connector and cable assembly empower you to dream big when designing your communication system. Through a footprint thats up to 50% smaller than current SFP+ interconnects, the micro SFP+ interconnects allow you to increase faceplate density while freeing up ad- ditional PCB space due to the board connectors shortened length. The products designs have also been enhanced to improve signal routing, minimize EMI and optimize automated manufacturing processes. Increases Faceplate Density / Saves PCB Space: micro SFP+ is up to 50% smaller than current SFP+ connectors, in width and length, taking up as little as 15mm board space. One micro SFP+ frees up 19% more faceplate space than 1 SFP+ connector. Improves Signal Integrity: The cable assembly and connector were designed with a staggered contact configuration that improves signal routing. Additionally, the bottom and top contacts have been further optimized for speed. Reduces EMI: EMI is minimized through a die cast housing, cable shield crimped at 360 degrees, and an extended EMI shield over the cables plug. Optimizes Manufacturing Processes: For manufacturing automation, the board interconnect combines the connector & cage into one finished product for automated of board placement. High temperature pin in paste soldering can be achieved as the product withstands up to 265 degrees Celsius. DATA COMMUNICATIONS /// MICRO SFP+ CONNECTOR AND CABLE ASSEMBLYApplications Telecommunications: Cellular infrastructure, hubs servers and switches Data communication: servers and storage equipment Medical diagnostic equipment Networking: Network interface, storage, power supplies and test and measurement equipment Specifications / Protocols Electrically compliant to SFF-8431 10 Gigabit Ethernet and Gigabit Ethernet (IEEE802.3ae) Fibre channel: 1, 2, 4 and 8 GFC InfiniBand standard (10Gbps) Fibre Channel over Ethernet (FCoE) Serial data transmission Parts Reference Guide Minimum Maximum Part Configuration Data Rate AWG Cable Length Cable Length Equalization micro SFP+ to micro 2142969 10 Gbps 26 0.5m 6.0m unEQ SFP+ 2142970 micro SFP+ to SFP+ 10 Gbps 26 0.5m 6.0m unEQ Connector EMI Spring Part Number Configuration Finger Design Solder Tail Lightpipe 2246040-1 micro SFP Yes Yes No 2246041-1 micro SFP+ Yes Yes No DATA COMMUNICATIONS /// MICRO SFP+ CONNECTOR AND CABLE ASSEMBLY PPAAGE 2GE 2