RF Signal Relays
AXICOM
HF3 S Relay
n
Y-Design
n
Frequency range DC to 3GHz
n
Impedance 50 / 75
n
Small dimensions (15x7.6x10.6mm)
Telecom-, Signal and RF Relays Sep. 07
n
1 form C contact (1 changeover contact)
n
Immersion cleanable
HF3 S Relay
n
Low power consumption (140mW)
Terminal assignment
Typical applications Relay top view
Cable modems and linecards/ CATV, Tabs, measurement and test
equipment ATE, satellite / audio / video tuners, wireless base stations and
Non-latching type, Latching type, 1 coil Latching type, 2 coils
antennas, power stages
not energized condition rest condition reset condition
Telecom-, Signal and RF Relays Sep. 07
Contact Data Coil Data (continued)
Telecom-, Signal and RF Relays
Sep. 07
Contact arrangement 1 form C, 1 CO
HF3 S Relay
Max. switching voltage 220VDC, 250VAC Coil versions, bistable
HF3 S Relay
Rated current 2A Coil Rated Set Limiting Reset Coil Rated coil
Limiting continuous current, 23C 2A code voltage voltage voltage voltage resistance power
Terminal assignment
Switching power 60W, 62.5VA, VDC VDC VDC VDC 10% mW
Terminal assignment
50W (2.5GHz) 50 version, bistable, 1 coil
Relay top view
Max. Continuos RF-Power, 73S 5 3.75 15.30 -3.75 357 70
Relay top view
1)
at 20C., VSWR <1.2 100W @ 3GHz 50 version, bistable, 2 coils
1)
150W @ 2GHz 91S 3 2.25 6.50 2.25 64 140
Non-latching type, Latching type, 1 coil Latching type, 2 coils
1)
Breaking capacity max. 300W 92S 4.5 3.38 9.80 3.38 145 140
Non-latching type, Latching type, 1 coil Latching type, 2 coils
not energized condition rest condition reset condition
Contact material Ag, Au covered 93S 5 3.75 10.90 3.75 178 140
not energized condition rest condition reset condition
Minimum switching voltage 100V 96S 12 9.00 26.10 9.00 1028 140
Initial contact resistance <100m at 10mA/20mV 75 version, bistable, 2 coils
Operate time typ. 3ms, max. 5ms 41S 3 2.25 6.50 2.25 64 140
Release time 42S 4.5 3.38 9.80 3.38 145 140
without diode in parallel typ. 2ms, max. 5ms 43S 5 3.75 10.90 3.75 178 140
with diode in parallel typ. 4ms, max. 6ms 46S 12 9.00 26.10 9.00 1028 140
Bounce time max. typ. 1ms, max. 3ms All figures are given for coil without prCoil Operating Rangee-energization, at ambient temperature +23C.
Duration of set/reset pulse min. 20ms
7
Mechanical endurance 10 operations
140 mW 70 mW
1) with appropriat cooling only Coil operating Range
3.5
140 mW
Coil Data
70 mW
Coil voltage range 3 to 24VDC
3
Umax. at 0 A
Umax. at 0 A
Coil versions, monostable 2.5
Coil Rated Operate Limiting Release Coil Rated coil
2
code voltage voltage voltage voltage resistance power
VDC VDC VDC VDC 10% mW
1.5
50 version, monostable, 1 coil U nom. nominal coil voltage
U nom. nominal coil voltage
51 3 2.25 6.50 0.30 64 140 1
52 4.5 3.38 9.80 0.45 145 140
Uop. min.
Coil Operating Range 0.5
53 5 3.75 10.90 0.50 178 140
Uop. min.
Coil Operating Range
Urel. min.
56 12 9.00 26.10 1.20 1028 140
0
-55-45 -35-25 -15-55 15 25 35 45 55 65 75 85 95 105115 125135
57 24 18.00 52.30 2.40 4114 140
140 mW 70 mW
140 mW 70 mW
Ambient Temperature [C]
75 version, monostable, 1 coil Ambient Temperature [C]
01 3 2.25 6.50 0.30 64 140
3.5
140 mW
02 4.5 3.38 9.80 0.45 145 140 3.5
140 mW
70 mW
U = Nominal coil voltage 70 mW
03 5 3.75 10.90 0.50 178 140 nom
3
Umax. at 0 A
3
U = Upper limit of the operative range of
05 9 6.75 19.60 0.90 574Umax. at 0 A 140
max.
Umax. at 0 A
06 12 9.00 26.10 1.20 1028 140 2.5 the coil voltage (limiting voltage)Umax. at 0 A
2.5
All figures are given for coil without pre-energization, at ambient temperature +23C. U = Lower limit of the operative range of
op. min.
2
2 the coil voltage (reliable operate voltage)
For latching relays U resp U min.
set min. . reset
1.5
1.5
U nom. nominal coil voltage U = Lower limit of the operative range of
rel. min.
U nom. nominal coil voltage
1U nom. nominal coil voltage
the coil voltage (reliable release voltage)
1U nom. nominal coil voltage
Uop. min.
Uop. min.
0.5
0.5
Uop. min.
Urel. min.
Uop. min.
Urel. min.
0
0
-55-45 -35-25 -15-55 15 25 35 45 55 65 75 85 95 105115 125135
-55-45 -35-25 -15-55 15 25 35 45 55 65 75 85 95 105115 125135
Ambient Temperature [C]
Ambient Temperature [C]
Ambient Temperature [C]
Ambient Temperature [C]
All specications subject to change. Consult Tyco Electronics for latest specications.1 5 of 12
06-2013, Rev. 0613 Datasheets and product specification Datasheets and product data is subject to the Datasheets, product data, Definitions sec-
U = Nominal coil voltage
nom
U = Nominal coil voltage
nom
www.te.com according to IEC 61810-1 and to be used terms of the disclaimer and all chapters of tion, application notes and all specifications
U = Upper limit of the operative range of
max.
U = Upper limit of the operative range of
2013 Tyco Electronics Corporation, only together with the Definitions section. the Definitions section, available at are subject to change.
max.
the coil voltage (limiting voltage)
a TE Connectivity Ltd. company AXICOMAXICOM
RF Signal Relays
AXICOM
Telecom-, Signal and RF RelaysTelecom-, Signal and RF Relays 108-98021 Rev. 108-98021 Rev. D D
AXICOMAXICOM
HF3 S Relay (Continued)
HF3 S RelaHF3 S Relay y
Telecom-, Signal and RF RelaysTelecom-, Signal and RF Relays 108-98021 Rev. 108-98021 Rev. D D
AXICOMAXICOM
HF3 S RelaHF3 S Relay y
Insulation Data 50 version 75 version Other Data
High FrHigh Frequency Dataequency Data
Initial dielectric strength Telecom-, Signal and RF Relays Telecom-, Signal and RF Relays Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content108-98021 Rev. 108-98021 Rev. D D
between open contacts 600V refer to the Product Compliance Support Center at
rms
between contact and coil 1000V www.te.com/customersupport/rohssupportcenter
rms
HF3 S RelaHF3 S Relay y
RF characteristics Initial surge withstand voltageRF characteristics 50 Ambient temperatur50 e 75 75 -55C to +85C
High FrHigh Frequency Dataequency Data
between open contacts 1000V Thermal resistance <165K/W
Isolation at 100 MHz / 900 MHz / 3 GHzIsolation at 100 MHz / 900 MHz / 3 GHz -95dB / -80dB / -55dB-95dB / -80dB / -55dB -96dB / -80dB / -50dB-96dB / -80dB / -50dB
between contact and coil 1500V Category of environmental protection
Insertion loss at 100 MHz / 900 MHz / 3 GHzInsertion loss at 100 MHz / 900 MHz / 3 GHz -0.03dB / -0.12dB / -0.30dB-0.03dB / -0.12dB / -0.30dB -0.03dB / -0.12dB / -0.30dB -0.03dB / -0.12dB / -0.30dB
IEC 61810 RT III - wash tight
RF characteristics RF characteristics 50 50 75 75
High Fr V High Fr V .S.Wequency Data.S.W.R. at 100 MHz / 900 MHz / 3 GHzequency Data.R. at 100 MHz / 900 MHz / 3 GHz 1.05 / 1.10 / 1.25Degr1.05 / 1.10 / 1.25ee of protection, IEC 60529 1.05 / 1.20 / 1.30 IP 67, immersion cleanable1.05 / 1.20 / 1.30
RF Data Vibration resistance (functional) 35g, 10 to 1000Hz
Isolation at 100 MHz / 900 MHz / 3 GHzIsolation at 100 MHz / 900 MHz / 3 GHz -95dB / -80dB / -55dB-95dB / -80dB / -55dB -96dB / -80dB / -50dB-96dB / -80dB / -50dB
Isolation Shock resistance (functional), half sinus 11ms 50g
Insertion loss at 100 MHz / 900 MHz / 3 GHzInsertion loss at 100 MHz / 900 MHz / 3 GHz -0.03dB / -0.12dB / -0.30dB-0.03dB / -0.12dB / -0.30dB -0.03dB / -0.12dB / -0.30dB -0.03dB / -0.12dB / -0.30dB
at 100MHz/900MHz 95dB/80dB 96dB/80dB Shock resistance (destructive), half sinus 0.5ms 150g
RF characteristics RF characteristics 50 50 75 75
V V .S.W.S.W.R. at 100 MHz / 900 MHz / 3 GHz.R. at 100 MHz / 900 MHz / 3 GHz 1.05 / 1.10 / 1.251.05 / 1.10 / 1.25 1.05 / 1.20 / 1.301.05 / 1.20 / 1.30
at 3GHz 55dB 50dB Terminal type SMT
50 50 Isolation at 100 MHz / 900 MHz / 3 GHzIsolation at 100 MHz / 900 MHz / 3 GHz -95dB / -80dB / -55dB75-95dB / -80dB / -55dB 75 -96dB / -80dB / -50dB-96dB / -80dB / -50dB
Insertion loss Weight max. 3g
at 100MHz/900MHz 0.03dB/0.12dB 0.03dB/0.12dB Resistance to soldering heat SMT
Insertion loss at 100 MHz / 900 MHz / 3 GHzInsertion loss at 100 MHz / 900 MHz / 3 GHz -0.03dB / -0.12dB / -0.30dB-0.03dB / -0.12dB / -0.30dB -0.03dB / -0.12dB / -0.30dB -0.03dB / -0.12dB / -0.30dB
at 3GHz 0.30dB 0.30dB IEC 60068-2-58 265C/10s
V V .S.W.S.W.R. at 100 MHz / 900 MHz / 3 GHz.R. at 100 MHz / 900 MHz / 3 GHz 1.05 / 1.10 / 1.251.05 / 1.10 / 1.25 1.05 / 1.20 / 1.301.05 / 1.20 / 1.30
Voltage standing wave ratio (VSWR) Moisture sensitive level, JEDEC J-Std-020D MSL3
50 50 75 75
0 0
at 100MHz/900MHz/3GHz 1.05/1.10/1.25 1.05/1.20/1.30 Ultrasonic cleaning not recommended
0 0
NO NO Packaging/unit, SMT reel/250 pcs., box/250 pcs. NO NO
NC NC NC NC
-20 -20
-20 -20
50 50 75 75
0 0
0 0
-40 -40 -40 -40
NO NO NO NO
RF performance, 50 version RF performance, 75 version
NC NC NC NC
-20 -20
-20 -20
-60 -60
-60 -60
0 0
0 0
-40 -40 -40 -40
-80 -80
-80 -80
NO NO NO NO
NC NC NC NC
-20 -20
-20 -20
-60 -60
-100 -100
-60 -60
-100 -100
-40 -40
-40 -40
-80 -80
-120 -120
-80 -80
-120 -120
0 0 500 500 1000 1000 1500 1500 2000 2000 2500 2500
050500 00 1000 1000 1500 1500 2000 2000 2500 2500 3000 3000
Frequency [MHzFrequency [MHz] ]
-60 -60
-60 -60
Frequency [MHz]Frequency [MHz] -100 -100
-100 -100
-80 -80
-120 -120
-80 -80
-120 -120
0 0 500 500 1000 1000 1500 1500 2000 2000 2500 2500
050500 00 1000 1000 1500 1500 2000 2000 2500 2500 3000 3000
Frequency [MHzFrequency [MHz] ]
-100 -100
Frequency [MHz]Frequency [MHz]
-100 -100
-120 -120
0.00 0.00
0.00 0.00
-120 -120
0 0 500 500 1000 1000 1500 1500 2000 2000 2500 2500
NO NO
050500 00 1000 1000 1500 1500 2000 2000 2500 2500 3000 3000 NO NO
NC NC Frequency [MHzFrequency [MHz] ]
NC NC
Frequency [MHz]Frequency [MHz]
-0.10 -0.10
-0.10 -0.10
0.00 0.00
0.00 0.00
NO NO NO NO
NC NC NC NC
-0.20 -0.20
-0.20 -0.20
-0.10 -0.10
-0.10 -0.10
0.00 0.00
0.00 0.00
NO NO
NO NO
NC NC -0.30 -0.30
NC NC
-0.30 -0.30
-0.20 -0.20
-0.20 -0.20
-0.10 -0.10 -0.10 -0.10
-0.40 -0.40
-0.40 -0.40 0 0 500 500 1000 1000 1500 1500 2000 2000 2500 2500
-0.30 -0.30
050500 00 1000 1000 1500 1500 2000 2000 2500 2500 3000 3000
-0.30 -0.30
-0.20 -0.20 Frequency [MHzFrequency [MHz] ]
-0.20 -0.20
Frequency [MHz]Frequency [MHz]
-0.40 -0.40
-0.40 -0.40 0 0 500 500 1000 1000 1500 1500 2000 2000 2500 2500
-0.30 -0.30
-0.30 -0.30
050500 00 1000 1000 1500 1500 2000 2000 2500 2500 3000 3000
Frequency [MHzFrequency [MHz] ]
Frequency [MHz]Frequency [MHz]
-0.40 -0.40
1.40 1.40
1.40 1.40
-0.40 -0.40 0 0 500 500 1000 1000 1500 1500 2000 2000 2500 2500
NO NO
050500 00 1000 1000 1500 1500 2000 2000 2500 2500 3000 3000
NO NO
NC NC Frequency [MHzFrequency [MHz] ] NO NO
NC NC
Frequency [MHz]Frequency [MHz]
NC NC
1.30 1.30
1.30 1.30
1.40 1.40
1.40 1.40
NO NO
NO NO
NC NC NO NO
NC NC
NC NC
1.20 1.20
1.20 1.20
1.30 1.30 1.30 1.30
1.40 1.40
1.40 1.40
NO NO
NO NO
NC NC NO NO
1.10 1.10
NC NC
1.10 1.10
NC NC
1.20 1.20
1.20 1.20
1.30 1.30
1.30 1.30
1.00 1.00
1.00 1.00 050500 00 1000 1000 1500 1500 2000 2000 2500 2500
1.10 1.10
1.10 0 1.10 0 500 500 1000 1000 1500 1500 2000 2000 2500 2500 3000 3000
Frequency [MHzFrequency [MHz] ]
1.20 1.20
1.20 1.20
Frequency [MHzFrequency [MHz] ]
1.00 1.00
2
1.00 1.00
1.10 051.10 0500 00 1000 1000 1500 1500 2000 2000 2500 2500
1.1006-2013,1.10 Rev. 0613 Datasheets and product specification Datasheets and product data is subject to the Datasheets, product data, Definitions sec-
0 0 500 500 1000 1000 1500 1500 2000 2000 2500 2500 3000 3000
Frequency [MHzFrequency [MHz] ]
Frequency [MHzFrequency [MHz] ]
www.te.com according to IEC 61810-1 and to be used terms of the disclaimer and all chapters of tion, application notes and all specifications
2013 Tyco Electronics Corporation, only together with the Definitions section. the Definitions section, available at are subject to change.
1.00 1.00
a TE Connectivity Ltd. company