3100-40Q10999AT TE Connectivity

Catalog 1308242 PRODUCTS UNLIMITED Issued 06-19 Model 93 - 3100 series Definite Purpose Contactor 4-pole, 25-40 FLA AC Coil File E75492 File EN60947-4-1:2010+A1 AC1:40A 480VAC, AC3: 30A 480VAC Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features Environmental Data Temperature Range: Storage and Operating: -40C +65C. 4-pole contactors. Convenient universal mounting plate. Flammability: UL 94-HB housing. Optional interlock/auxiliary switches available. Mechanical Data Contact Termination: 25, 30 FLA Models Contact Data 25C Type: 10-32 Screw with quad 0.250 (6.35 mm) quick connects. Wire Size: 16-8 AWG (Stranding must be split for 8 AWG wire.) Arrangements: 4 Form X (4PST-NO-DM). Tightening Torque: 25 in.-lbs. Maximum Ratings: See Contact Ratings Table. 40 FLA Models Material: Silver Cadmium Oxide. Type: Box Lug with dual 0.250 (6.35 mm) quick connects. Wire Size: 14-4 Cu/Al AWG Tightening Torque: 40 in.-lbs. Coil Termination: Dual 0.250 (6.35 mm) quick connects, standard. Coil Data 25C A 0.250 quick connect and a 6-32 screw, optional. Voltage: 24 - 480 VAC, 50/60 Hz. See Coil Data Table below. Arc Cover: Optional on 25-30 FLA models, standard on 40 FLA models. Insulation Class: UL Class B (130C). Weight: 24 oz. (683 g) approximately Duty Cycle: Continuous. Contact Ratings Full Number Line Locked Resistive Maximum Horsepower Load of Voltage Rotor Amps Voltage Single Three Amps Poles Amps Rating Phase Phase 240/277 150 35 110/120 2 - 25 4 480 125 35 200/208 - 7.5 600 100 35 240/277 5 10 480 - 15 240/277 180 40 110/120 2 - 30 4 480 150 40 200/208 - 10 600 120 40 240/277 5 10 480 - 15 240/277 240 50 110/120 3 - 40 4 480 200 50 200/208 - 10 600 160 50 240/277 7.5 10 480 - 20 Coil Data Nominal Coil Voltage 24 120 208/240 277 480 Maximum Pickup Volts 19.2 93 177 220 384 Drop-Out Volts Range 6 -15 20 - 70 40 - 140 50-185 150 - 270 58 Nominal Inrush VA 50 Hz 68 68 68 48 52 Nominal Inrush VA 60 Hz 60 60 60 52 11 Nominal Sealed VA 50 Hz 14 14 14 11 10.5 Nominal Sealed VA 60 Hz 10 10 10.5 10 750 Nominal DC Resistance - Ohms 5 148 520 2700 Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 836 specified. Refer to inside back cover.Catalog 1308242 PRODUCTS UNLIMITED Issued 06-19 Ordering Information Typical Part No. B 3100 - 40 Q 9 999 1. Series: 3100 = 4-pole, 25-40 FLA contactor 2.Packaging: Y = Individual Pack - = Bulk Pack A-ZZ = Customer specific information (assigned by factory) 3.Pole Configuration: 40 = 4 Form X (4PST-NO-DM) 4.Coil Voltage (50/60 Hz.): Q = 24VAC U = 208/240VAC H = 480VAC J = 120VAC, molded M = 277VAC, molded T = 120VAC V = 277VAC I = 24VAC, molded K = 208/240VAC, molded W = 480VAC, molded 5.Contact Ratings (Inductive): 8 = 25 FLA 9 = 30 FLA 10 = 40 FLA 6.Customer ID Suffix: 999 = Standard Model 000-998 = Factory assigned customer ID 7. Option Code: A - ZZ = Factory assigned customer-specific options. Standard part numbers listed below are more likely to be available from stock. None at present. Outline Dimensions Termination Options 2.00 3.055 (50.8) .250 .250 (77.6) (6.35) (6.35) .253 (6.43) Standard on Special on Standard 3.25 (82.55) 25, 30 FLA 25, 30 FLA on 40 FLA 3.125 3.75 10-32 Combination 10-32 Sems Lug accepts 14-4 (79.38) (95.25) Phillips, Slotted & Screw Cu/Al AWG 5/16 Hex Head with Pressure 12 Washer Plate ORDERING NOTE: Standard terminals need not be specified in the Ordering Information chart above. Special terminals are offered on a special order basis. Special order items may be 2.493 subject to extended leadtimes and significant minimum order .203 TYP (63.3) .203 TYP quantities. Your Tyco Electronics sales engineer must consult (5.156) (5.156) 2.633 with the factory before providing price and availability (66.9) information regarding items with these options. Shown with Optional Auxiliary Switch Auxiliary Switches Equipped with 0.250 (6.35) Quick Connect Terminals Various interlock / auxiliary switches are available for the Model 93 contactor. Factory Modifications Field Added Kits Description Contact Config. Kit Catalog Number of NO NC Number Kits Required Single unit interlock configurations listed. Maximum of two. Must 1 1 34220-332N 1 be same polarity. 2 2 34220-332N 2 See footnote (1) for ratings. NORMALLY OPEN & CLOSED SPDT 34220 -332N SPDT Circuit 1 1 34220-337N 1 34220 -337N See footnote (2) for ratings. 2 2 34220-337N 2 Footnotes: Ratings of Auxiliary Interlocks / Switches (1) Contact Rating Single Circuit NO or NC (2) Contact Rating SPDT (337): and two circuit NO/NC: 10A, 1/3 HP, 125 or 250 VAC 120V 240V 480V 600V 1/2A, 125 VDC 1/4A, 250 VDC: Break 3.0A 1.5A 0.75A 0.6A 4A 120 VAC on Lamp Load Make 30A 15A 7.5A 6A Continuous 10A 10A 10A 10A Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 837 specified. Refer to inside back cover.