Model 96 - 3100 series
Definite Purpose Contactor
1- or 2-pole, 20-40 FLA
AC Coil
File E75492
File EN60947-4-1:2010; EN60947-1:2007
File LR49598
Users should thoroughly review the technical data before selecting a product part
number. It is recommended that users also seek out the pertinent approvals files of
the agencies/laboratories and review them to ensure the product meets the
requirements for a given application.
Features
Environmental Data
Temperature Range: Storage and Operating: -40C +65C.
Robust 1- and 2-pole contactors.
Shunt available on 1-pole models. Flammability: UL 94-HB housing.
Convenient mounting plate.
Mechanical Data
Contact Termination:
20, 25, 30 FLA Models
Type: #10-32 Screw with quad 0.250 (6.35 mm) quick connects.
Contact Data @ 25C
Wire Size: 16-8 AWG (Stranding must be split for 8 AWG wire.)
Arrangements: 1 Form X (SPST-NO-DM) with or without shunt and
Tightening Torque: 25 in.-lbs.
2 Form X (DPST-NO-DM).
NOTE: Contactors with terminals of two-piece design are shipped
Maximum Ratings: See Contact Ratings Table.
with terminal screws left up to facilitate customer wiring. The
Material: Silver Cadmium Oxide.
customer must tighten the screws to the specified torque to
achieve a good electrical connection.
40 FLA Models
Type: Box Lug with dual 0.250 (6.35 mm) quick connects.
Coil Data @ 25C
Wire Size: 14-4 Cu/Al AWG
Voltage: 24 - 277 VAC, 50/60 Hz. See Coil Data Table below.
Tightening Torque: 40 in.-lbs.
(480 & 575VAC coils available upon request.)
Coil Termination: Dual 0.250 (6.35 mm) quick connects.
Insulation Class: UL Class B (130C).
Arc Cover: Optional on 20-30 FLA models, standard on 40 FLA models.
Duty Cycle: Continuous.
Weight: One Pole Types: 8 oz. (227 g) approximately.
Two Pole Types: 9.6 oz. (273 g) approximately
Contact Ratings
Full Number Line Locked Resistive Maximum Horsepower
Load of Voltage Rotor Amps Voltage Single
Amps Poles Amps Rating Phase
240/277 120 30 120 2
20 2 480 100 30 240 3
600 80 30
240/277 150 30 120 1
25 1 480 50 30 240 2
600 40 30
240/277 150 35 120 2
25 2 480 125 35 240 3
600 100 35
240/277 150 40 120 1
30 1 480 75 40 240 2
600 50 40
240/277 150 40 120 2
30 2 480 125 40 240 3
600 100 40
240/277 240 50 120 2
40 1 480 200 50 240 3
600 160 50
240/277 240 50 120 2
40 2 480 200 50 240 3
600 160 50
Coil Data
1-Pole Models 2-Pole Models
Nominal Coil Voltage 24 120 208/240 277 24 120 208/240 277
Maximum Pickup Volts 18 88 177 221 18 88 177 221
Drop-Out Volts Range 6 - 15 20 - 70 40 - 140 50 - 165 6 - 15 20 - 70 40 - 140 50 - 165
Nominal Inrush VA @ 50 Hz 22.5 22.5 22.5 22.5 37 37 37 37
Nominal Inrush VA @ 60 Hz 20 20 20 20 35 35 35 35
Nominal Sealed VA @ 50 Hz 77778888
Nominal Sealed VA @ 60 Hz 5.25 5.25 5.25 5.25 7777
Nominal DC Resistance - Ohms 10% 16.5 440 1850 2250 11 250 1000 1600
02-2013, Rev. 0213 EU RoHS/ELV, China RoHS, REACH, Halogen content Datasheets and product data is subject to the Datasheets, product data, Definitions sec-
www.te.com refer to the Product Compliance Support Center at terms of the disclaimer and all chapters of tion, application notes and all specifications
2013 Tyco Electronics Corporation, www.te.com/customersupport/rohssupportcenter the Definitions section, available at are subject to change.
1
a TE Connectivity Ltd. company Ordering Information
Typical Part No. > 3100 - 20 Q6 999
1. Series:
3100 = 1- or 2-pole, 20-40 FLA contactor
2.Packaging:
Y = Individual Pack
- = Bulk Pack
A-ZZZ = Customer specific information (assigned by factory)
3.Pole Configuration:
10 = 1 Form X (SPST-NO-DM)
15 = 1 Form X (SPST-NO-DM) with Shunt
20 = 2 Form X (DPST-NO-DM)
4.Coil Voltage (50/60 Hz.):
Q = 24VAC T = 120VAC U = 208/240VAC
P = 100VAC S = 200VAC V = 277VAC
5.Contact Ratings (Inductive):
1 = 25 FLA on 1-pole models 3 = 20 FLA on 2-pole models
2 = 30 FLA on 1-pole models 5 = 25 FLA on 2-pole models
14 = 35 FLA on 1-pole models 6 = 30 FLA on 2-pole models
19 - 40 FLA on 1-pole models 18 = 40 FLA on 2-pole models
6.Customer ID Suffix:
999 = Standard Model 000-998 = Factory assigned customer ID
7.Option Code:
Leave Blank = No customer-specific options A - ZZ = Factory assigned customer-specific options.
Standard part numbers listed below are more likely to be available from stock.
3100-15Q2999 3100-20Q6999 3100-20Q18999CL
3100-15T2999 3100-20T6999 3100-20T18999CL
3100-15U2999 3100-20U6999 3100-20U18999CL
Outline Dimensions Termination Options
2.10 Max.
1-Pole
(53.3)
.253
(6.43)
1.625
3.30
2.313 .875
(41.28)
(83.8)
(57.75) (22.2)
Standard Special Standard
on 20, 25, 30, 35 on 20, 25, 30, 35 FLA on 40 FLA
FLA #10-32 Sems Screw Lug accepts 14-4
#10-32 Combination with Pressure Plate Cu/Al AWG
.215 TYP
(5.46)
1.625 (41.3) Phillips, Slotted &
2.00 (50.8) 5/16 Hex Head
2.445
#12 Washer
(62.1)
2.541
(64.5)
2.10 Max.
2-Pole
(53.3)
1.625
.875
3.30 2.313
(41.28)
(22.2)
(83.8) (57.75)
.215 TYP
(5.46)
1.625 (41.3)
2.00 (50.8)
2.445
(62.1)
2.610
(66.3)
ORDERING NOTE: Standard terminals need not be specified in the Ordering Information chart above. Special terminals are offered on a special order basis.
Special order items may be subject to extended leadtimes and significant minimum order quantities. Your TE sales engineer must consult with the
factory before providing price and availability information regarding items with these options.
02-2013, Rev. 0213 EU RoHS/ELV, China RoHS, REACH, Halogen content Datasheets and product data is subject to the Datasheets, product data, Definitions sec-
www.te.com refer to the Product Compliance Support Center at terms of the disclaimer and all chapters of tion, application notes and all specifications
2013 Tyco Electronics Corporation, www.te.com/customersupport/rohssupportcenter the Definitions section, available at are subject to change.
2
a TE Connectivity Ltd. company