3100Y30I16999CJ TE Connectivity

Catalog 1308242 Issued 3-03 (PDF Rev. 1-06) PRODUCTS UNLIMITED Model 93 - 3100 series Definite Purpose Contactor 3-pole, 50-60 FLA AC Coil File E75492 File EN60947-4-1:1991 IEC 947-4-1 Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features Environmental Data Temperature Range: Storage and Operating: -40C +65C. 3-pole contactors. Convenient universal mounting plate. Flammability: UL 94-HB housing. Optional interlock/auxiliary switches available. Mechanical Data Contact Termination: Type: Box Lug with dual 0.250 (6.35 mm) quick connects. Contact Data 25C Wire Size: 14-2 Cu/Al AWG Tightening Torque: 50 in.-lbs. Arrangements: 3 Form X (3PST-NO-DM). Coil Termination: Dual 0.250 (6.35 mm) quick connects, standard. Maximum Ratings: See Contact Ratings Table. A 0.250 quick connect and a 6-32 screw, optional. Material: Silver Cadmium Oxide. Arc Cover: Standard. Weight: 32 oz. (910 g) approximately Coil Data 25C Voltage: 24 - 480 VAC, 50/60 Hz. See Coil Data Table below. Insulation Class: UL Class B (130C). Duty Cycle: Continuous. Contact Ratings Full Number Line Locked Resistive Tungsten/ Maximum Horsepower Load of Voltage Rotor Amps Ballast Voltage Single Three Amps Poles Amps Amps Phase Phase 110/120 3 - 50 3 240 300 65 200/208 7.5 15 480 250 65 53 240/277 10 15 600 200 65 480 - 25 600 - 25 110/120 5 - 60 3 240 360 75 200/208 7.5 25 480 300 75 53 240/277 10 25 600 240 75 480 - 30 600 - 30 Coil Data Nominal Coil Voltage 24 120 208/240 277 480 Maximum Pickup Volts 182 93 177 235 374 Drop-Out Volts Range 6 -15 20 - 70 40 - 135 50-180 120 - 286 Nominal Inrush VA 50 Hz 140 140 140 140 140 Nominal Inrush VA 60 Hz 132 132 132 132 132 Nominal Sealed VA 50 Hz 20 20 20 20 20 Nominal Sealed VA 60 Hz 14 14 14 14 14 Nominal DC Resistance - Ohms 2.4 45 180 280 852 Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 834 specified. Refer to inside back cover.Catalog 1308242 Issued 3-03 (PDF Rev. 1-06) PRODUCTS UNLIMITED Ordering Information Typical Part No. BB 3100 - 30 I 16 999 1. Series: 3100 = 3-pole, 50-60 FLA contactor 2.Packaging: Y = Individual Pack - = Bulk Pack A-ZZZ = Customer specific information (assigned by factory) 3.Pole Configuration: 30 = 3 Form X (3PST-NO-DM) 4.Coil Voltage (50/60 Hz.): I = 24VAC, molded K = 208/240VAC, molded J = 120VAC, molded M = 277VAC, molded W = 480VAC, molded 5.Contact Ratings (Inductive): 16 = 50 FLA 17 = 60 FLA 6.Customer ID Suffix: 999 = Standard Model 000-998 = Factory assigned customer ID 7. Option Code: Leave Blank = No customer-specific options A - ZZ = Factory assigned customer-specific options. Standard part numbers listed below are more likely to be available from stock. None at present. Outline Dimensions Termination 3.563 3.10 .218 TYP. (90.5) (78.7) (5.537) .438 2.75 (11.12) 2.032 .250 (69.9) (51.61) (6.35) .253 (6.43) Standard 3.25 on 50-60 FLA (82.55) Lug accepts 14-2 3.75 Cu/Al AWG 3.19 (95.25) (81.03) 1.468 .250 (37.29) 2.65 (6.35) 2.242 (67.3) (56.95) Shown with Optional Auxiliary Switch Equipped with 0.250 (6.35) Quick Connect Terminals Various interlock / auxiliary switches are available for the Model 93 contactor. Factory Modifications Field Added Kits Description Contact Config. Kit Catalog Number of NO NC Number Kits Required Single unit interlock 1 0 34300-303 1 configurations listed. 0 1 34300-331 1 Maximum of two. Must 1 1 34300-332 1 be same polarity. 2 0 34300-303 2 NORMALLY OPEN NORMALLY CLOSED See footnote (1) for ratings. 0 2 34300-331 2 -303 STYLE -331 STYLE 2 2 34300-332 2 SPDT Circuit 1 1 34300-337 1 See footnote (2) for ratings. 2 2 34300-337 2 SPDT Dry Circuit, 0.1 amp max. 1 1 34300-341 1 Gold Flashed Contacts 2 2 34300-340 1 Equipped with 6-32 Screw Terminals & Saddle Clamps Factory Modifications Field Added Kits NORMALLY OPEN & CLOSED SPDT Description Contact Config. Kit Catalog Number of -332 STYLE -337 & -341 STYLE NO NC Number Kits Required Single unit interlock 1 0 34300-342 1 configurations listed. 0 1 34300-343 1 Maximum of two. Must 1 1 34300-344 1 be same polarity. (note 1) Footnotes: Ratings of Auxiliary Interlocks / Switches (1) Contact Rating Single Circuit NO or NC (2) Contact Rating SPDT (337): and two circuit NO/NC: 10A, 1/3 HP, 125 or 250 VAC W/ 6-32 SCREW & SADDLE CLAMP 120V 240V 480V 600V 1/2A, 125 VDC 1/4A, 250 VDC: -344 STYLE Break 3.0A 1.5A 0.75A 0.6A 4A 120 VAC on Lamp Load Make 30A 15A 7.5A 6A Continuous 10A 10A 10A 10A Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 835 specified. Refer to inside back cover.